HIKVISION DS-IX2001-A3U User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Server
  5. DS-IX2001-A3U
  6. User manual

HIKVISION DS-IX2001-A3U User Manual

Intelligent fusion server
Hide thumbs
Table of Contents

Advertisement

Quick Links

Intelligent Fusion Server
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-IX2001-A3U

Summary of Contents for HIKVISION DS-IX2001-A3U

  • Page 1 Intelligent Fusion Server User Manual...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 Intelligent Fusion Server User Manual YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
  • Page 4 Intelligent Fusion Server User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 5 Intelligent Fusion Server User Manual Preface Applicable Models This manual is applicable to DS-IX2001-A3U/X and DS-IX2003-A3U/X. Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury.

  • Page 6: Table Of Contents

    Intelligent Fusion Server User Manual Contents Chapter 1 Introduction ....................... 1 1.1 Key Features ........................... 1 1.2 PC Requirements ........................1 Chapter 2 Configuration Wizard ....................2 2.1 Login ............................2 2.2 Create Cluster ........................3 2.2.1 Add Nodes ........................3 2.2.2 Create Stand-alone Cluster ...................
  • Page 7 Intelligent Fusion Server User Manual 3.2.2 Stranger Alarm ......................30 3.2.3 Frequently Appeared Person Alarm ................32 3.2.4 License Plate Alarm ..................... 33 3.3 Personnel Archive ........................ 34 3.4 1 V 1 Comparison ......................... 36 Chapter 4 Smart Search ......................38 4.1 Face Picture Search ......................
  • Page 8 Intelligent Fusion Server User Manual 5.3.2 Service Configuration ....................49 5.3.3 Pre-Classification Configuration .................. 50 5.3.4 Time Configuration ..................... 50 5.3.5 User Management ...................... 51 5.3.6 Display Cofiguration ....................52 5.3.7 Live View Configuration ....................53 5.3.8 Person Pattern Configuration ..................53 5.3.9 Restore Default ......................

  • Page 9: Chapter 1 Introduction

    Intelligent Fusion Server User Manual Chapter 1 Introduction Intelligent fusion server (hereafter referred as the sever), equipped with professional GPU card, integrates deep learning-based algorithms of facial analysis, picture structuralization and video structuralization. It combines analysis, storage and application as one. By recognizing, analyzing, modelling and comparing pictures of faces, human bodies or vehicles, the intelligent fusion server can perform functions as list alarm, creating personnel archives, personnel trace analysis, searching by human body picture, vehicle arming, and so forth.

  • Page 10: Chapter 2 Configuration Wizard

    Intelligent Fusion Server User Manual Chapter 2 Configuration Wizard 2.1 Login You can get access to the server with web browser. Note You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection.

  • Page 11: Create Cluster

    Intelligent Fusion Server User Manual Note • If the server is inaccessible, go to Internet Options → Advancement , check Enable TLS1.1 and Enable TLS1.2. • The specific interface depends on the product. After admin user logs in, the server will jump to the homepage where you can view information such as Alarm Statistics, Camera Statistics, and Capture Statistics.

  • Page 12: Create Stand-Alone Cluster

    Intelligent Fusion Server User Manual Figure 2-4 Configure Nodes Information Note If there are multiple nodes to be added, please follow the steps above to finish. 2.2.2 Create Stand-alone Cluster Single node can create standalone cluster. After creating cluster, the server can analyze data. Before You Start The node is online.
  • Page 13 Intelligent Fusion Server User Manual Figure 2-6 Select Nodes 3. Click zookeeper, kafka, MongoDB, appServer respectively and check the desired nodes. Figure 2-7 Deploying Service 4. Click Start Deploying. 5. Click OFF after deploying is completed.
  • Page 14 Intelligent Fusion Server User Manual Figure 2-8 Click OFF 6. Clik Resource Configuration to allocate resources for face picture analysis and face video analysis. Face Picture Analysis Path Intelligent analysis of face attributes in pictures. Face Video Analysis Path Intelligent analysis of face attributes in videos. Structured Picture Analysis Channel Intelligent analysis of target (human body or vehicle) attributes in pictures.

  • Page 15: Create Master And Backup Cluster

    Intelligent Fusion Server User Manual 2.2.3 Create Master and Backup Cluster Two or more nodes can create a master and backup cluster. Data can only be analyzed after the cluster is created. Before You Start The nodes are online and in the same subnet. Steps 1.

  • Page 16: Add Face List Library

    Intelligent Fusion Server User Manual Figure 2-10 Allocate Resource 2.3 Add Face List Library Add different list libraries, including normal library, blacklist library and VIP library. Steps 1. Go to List Management, and click Add. Figure 2-11 List Library Interface 2.

  • Page 17: Add Personnel Information

    Intelligent Fusion Server User Manual Figure 2-12 Add Face List Library Note Only when List Library Type is set as Arm Library can the alarming and personnel archive function be implemented. 3. After setting, click OK. 4. Optional: After adding face list library, you can click to modify list library information and click to delete it.

  • Page 18: Create Analysis Task

    Intelligent Fusion Server User Manual Figure 2-14 Add Personnel Information Note • Name and Birthday are required, enter different contents according to actual demands. • The server supports uploading face picture in the format of jpg, jpeg, bmp, tif and png. 3.
  • Page 19 Intelligent Fusion Server User Manual 2. Go to Administration-admin → Figure 2-15 Add Control Center 3. Select Control Center as Type and enter the name of control center. 4. Click OK. 5. Click the newly-added control center and enter information in the popup window. Figure 2-16 Add Camera 6.

  • Page 20: Create Real-Time Analysis Task

    Intelligent Fusion Server User Manual Figure 2-17 Add Area 9. Click OK. Note The area name supports number, lowercase and uppercase, and special characters “-, _”, and up to 32 characters are allowed. 10. Click the newly-added area and then click Add. Figure 2-18 Add Camera to Area Note The camera can be armed only when it is added to area.
  • Page 21 Intelligent Fusion Server User Manual Before You Start The camera has been added. Steps 1. Real-Time Task List 2. Go to Target Arming → Task Management , click New. Figure 2-19 Task Management Interface 3. Check a desired camera or multiple cameras, click Create. Figure 2-20 Check Cameras 4.
  • Page 22 Intelligent Fusion Server User Manual Figure 2-21 Set Rule Caution This step is only applicable for face capture cameras. 5. Click OK. 6. Click to set detailed schedule. The server excutes all-hours analysis by default. 7. Click Create. Batch Configuration Configuration of any camera will lead to the change of all cameras.

  • Page 23: Create Video Record Analysis Task

    Intelligent Fusion Server User Manual Figure 2-22 Create Real-time Analysis Task 2.5.3 Create Video Record Analysis Task Video record analysis task is used to analyze targets in video record files. Skip this part if there is no video. Before You Start •...
  • Page 24 Intelligent Fusion Server User Manual Figure 2-23 Import Video Interface Caution Set the video starting time, otherwise the time of analysis results will be inconsistent with that of actual recording. 3. Click Browse to select desired video recording files. 4. Set the actual time of recording as video starting time . Figure 2-24 Set Video Starting Time...
  • Page 25 Intelligent Fusion Server User Manual 5. Click OK. 6. Click Import and select the desired videos in the list. 7. Click Next. Figure 2-25 Select Recordings Note If the live view function is disabled, you may have to install a plug-in in accordance with the prompt.
  • Page 26 Intelligent Fusion Server User Manual Figure 2-26 Set Rule 9. Click Create. Batch Configuration Configuration of any camera will lead to the change of all cameras. Video Structure Analysis of target attributes. This type of analysis task should be created before you set license plate arming.

  • Page 27: Add Arming

    Intelligent Fusion Server User Manual Figure 2-27 Create Video Record Analysis Task 2.6 Add Arming 2.6.1 Add List Arming Listing arming is used to compare the faces captured by cameras with that of list library. If the similarity between this two pictures reaches the configured threshold value, a list alarm will be triggered.

  • Page 28: Add Stranger Arming

    Intelligent Fusion Server User Manual Parameter Name Description Arming Camera Select the desired camera. Arming Time Set arming time. You can click to customize arming period. Threshold The higher the threshold is, the higher value of face similarity should Figure 2-28 Set List Arming Parameters 3.

  • Page 29: Add License Plate Arming

    Intelligent Fusion Server User Manual Table 2-3 Parameter Setting Parameter Name Description Name and Note Enter relevant information according to actual condition. Arming Type Select Stranger Arm. Arming Object Select the desired list library. Arming Camera Select the desired camera. Arming Time Set arming time.

  • Page 30: Enable Frequency Alarm

    Intelligent Fusion Server User Manual Before You Start A real-time or video record analysis task has been created, and its type is set as Video Structure. Steps 1. Go to Target Arming → License Plate Arming , and check Enable. Figure 2-30 License Plate Arming Interface Note Import the template of license plate arming information to enable batch license plate arming.
  • Page 31 Intelligent Fusion Server User Manual Table 2-5 Parameter Setting Parameter Name Description Enable Check Enable. Arming Camera Select the desired camera to count the personnel appearance frequency. List to Filter Filter the personnel in list library so that those personnel will not be counted.

  • Page 32: Enable Personnel Archive

    Intelligent Fusion Server User Manual Figure 2-32 Enable Frequency Alarm 3. Click Save. 2.8 Enable Personnel Archive Personnel archive is used to compare the similarity between face captured by camera and that of face list libraries(except the passerby library). If the similarity value is greater than or equal to threshold value, the captured picture will be classified and saved into the real name archive.

  • Page 33: Reset Standard

    Intelligent Fusion Server User Manual Parameter Name Description Arming Camera Select desired cameras. Threshold Compare the similarity between face captured by camera and that of face list library (except passerby library). If the similarity value is greater than or equal to the threshold value, the captured picture will be classified and saved into the real name archive.
  • Page 34 Intelligent Fusion Server User Manual Figure 2-34 Reset Standard 2. Click Reset Standard.

  • Page 35: Chapter 3 Smart Application

    Intelligent Fusion Server User Manual Chapter 3 Smart Application The smart application includes live view, alarm search, personnel archive and 1 V 1 comparison. 3.1 Live View You can view real-time video recordings and captured pictures, as well as alarming information, including list alarm information, stranger alarm information and frequently appeared personnel alarm information.
  • Page 36 Intelligent Fusion Server User Manual Interface Area Description • Click to capture pictures manually. The captured picture will be saved automatically. Go to Live View Configuration to configure the saving path. • Click to view in split window • Click to view in full screen.

  • Page 37: Alarm Search

    Intelligent Fusion Server User Manual Figure 3-2 Alarming Setting Interface 3.2 Alarm Search Search detailed information of list alarm, stranger alarm, frequently appeared personel alarm and license plate alarm. 3.2.1 List Alarm Compare the similarity between captured face pictures and those in list library like blacklist library. A list alarm will be triggered if the similarity reaches configured value.

  • Page 38: Stranger Alarm

    Intelligent Fusion Server User Manual Figure 3-3 List Alarm Interface 2. Optional: Select the desired cameras or videos. If no camera or record is selected, all the alarm information will be displayed. 3. Set search conditions according to actual needs. 4.
  • Page 39 Intelligent Fusion Server User Manual Steps 1. Go to Alarm Search → Stranger Alarm . By default, the server displays all current alarm information. Figure 3-5 Stranger Alarm Interface 2. Optional: Select the desired cameras or records. If no camera or record is selected, the server will search all the alarm information.

  • Page 40: Frequently Appeared Person Alarm

    Intelligent Fusion Server User Manual 7. Optional: Click Export Current Page or Export All to export alarm information. 3.2.3 Frequently Appeared Person Alarm Count personnel appearance frequency in monitoring scenes. An alarm will be triggered if the frequency reaches the configured value. Before You Start Enable frequency alarm.

  • Page 41: License Plate Alarm

    Intelligent Fusion Server User Manual Figure 3-8 View Detailed Information-Frequently Appeared Person Alarm Note You can view all captured information of the target person by clicking Capture History 6. Optional: Click Alarm Confirmation to confirm the alarm. 7. Optional: Click Export Current Page or Export All to export alarm information. 3.2.4 License Plate Alarm Compare the license plate recognized by cameras with armed license plates.

  • Page 42: Personnel Archive

    Intelligent Fusion Server User Manual Figure 3-9 License Plate Alarm Interface 2. Optional: Select the desired cameras or records. If no camera or record is selected, the server will search all the alarm information. 3. Set search conditions according to actual needs. 4.
  • Page 43 Intelligent Fusion Server User Manual Figure 3-11 Personnel Archive Interface Real Name It refers to the personnel whose face picture is in list libraries, except the passerby library. Not Real Name It refers to the personnel whose face picture is in passerby library. Statistic Report In accordance with gender, age or total personnel frequency in a period, the statistic report shows different figures of strangers and real name personnel recognized by cameras or in the...

  • Page 44: Comparison

    Intelligent Fusion Server User Manual Figure 3-13 Personnel Archive Search Result 3. Click to view detail information. 3.4 1 V 1 Comparison Upload two face pictures to compare their similarity degree. Steps 1. Go to Smart Application → 1 V 1 Comparison . Figure 3-14 1 V 1 Comparison Interface 2.
  • Page 45 Intelligent Fusion Server User Manual Figure 3-15 1 V 1 Comparison Result...

  • Page 46: Chapter 4 Smart Search

    Intelligent Fusion Server User Manual Chapter 4 Smart Search 4.1 Face Picture Search 4.1.1 Search by Facial Feature Search captured face pictures by face attributes. Before You Start Alarm the camera. Steps 1. Go to Smart Search → Face Picture Search → Search by Attribute . By default, the server displays all captured face pictures.

  • Page 47: Search By Face Picture

    Intelligent Fusion Server User Manual 5. Optional: Click Export Current Page or Export All to export captured information. 4.1.2 Search by Face Picture Upload a face picture to search similar pictures in capture library. Before You Start Alarm the camera. Steps 1.

  • Page 48: Confirm Identification

    Intelligent Fusion Server User Manual Note Click to set this face picture as target picture to search picture by picture. Click to set this face picture as target picture to confirm identification. Click to add this face picture to list library.

  • Page 49: Human Body Search

    Intelligent Fusion Server User Manual 6. Click the face picture displayed to view detailed information. Note Click to set this face picture as target picture to search picture by picture. Click to set this face picture as target picture to confirm identification. 4.2 Human Body Search 4.2.1 Search by Physical Attribute Search captured human body pictures by human body attributes.

  • Page 50: Search By Human Body Feature

    Intelligent Fusion Server User Manual 4.2.2 Search by Human Body Feature Upload a human body picture to search similar human body pictures in capture library. Before You Start Alarm the camera. Steps 1. Go to Smart Search → Human Body Search → Search by Picture . By default, the server displays all captured human body pictures.

  • Page 51: Vehicle Search

    Intelligent Fusion Server User Manual Note Click to set this human body picture as target picture to search human body by human body. 7. Optional: Click Export Current Page or Export All to export captured information. 4.3 Vehicle Search 4.3.1 Search by Vehicle Attribute Search captured vehicle pictures by vehicle attributes Before You Start Alarm the camera.

  • Page 52: Search By Vehicle Picture

    Intelligent Fusion Server User Manual Figure 4-8 Vehicle Capture Results Note Click to set this vehicle picture as target picture to search vehicle by vehicle. 5. Optional: Click Export Current Page or Export All to export captured information. 4.3.2 Search by Vehicle Picture Upload a Vehicle picture to search related vehicle pictures in capture library.
  • Page 53 Intelligent Fusion Server User Manual Note • Human body pictures in JPG, JPEG, BMP, TIF and PNG format with a minimum resolution of 48 * 48 but no greater than 8 million are supported. The picture size should be greater than 8 •...

  • Page 54: Chapter 5 System Management

    Intelligent Fusion Server User Manual Chapter 5 System Management 5.1 Cluster Management 5.1.1 Delete Node Before You Start The node is online and not included in any cluster. Steps 1. Go to System Management → Cluster Management → Node Management . 2.

  • Page 55: Add More Nodes To Cluster

    Intelligent Fusion Server User Manual 5.1.4 Add More Nodes to Cluster Add more nodes to cluster to enhance its capacity. Before You Start • The new nodes have been added. • The new nodes are in the same subnet of the cluster. Steps 1.

  • Page 56: Operation And Maintenance

    Intelligent Fusion Server User Manual 3. Click OK. 5.2 Operation and Maintenance 5.2.1 Check Hardware Status Check detailed information of CPU, memory, disk, GPU and etc. Steps 1. Go to System Management → Operation and Maintenance → Hardware Status . 2.

  • Page 57: System Configuration

    Intelligent Fusion Server User Manual 5.3 System Configuration 5.3.1 General Configuration Keep parameters as default value. Note The server enables device filter function by default, the server is accessible via its IP address only. If you have configured port mapping, please disable the device filter function in order to access to the server normally.

  • Page 58: Pre-Classification Configuration

    Intelligent Fusion Server User Manual 5.3.3 Pre-Classification Configuration It pre-classifies personnel in list library to speed up the process of searching by picture and confirming identification. Steps 1. Go to System Management → System Configuration → Pre-classification . Figure 5-7 Pre-Classification Configuration 2.

  • Page 59: User Management

    Intelligent Fusion Server User Manual 5.3.5 User Management There are three types of users, including admin, operator and consumer. Only admin has the permission to add and delete user, and edit user password. Operator and consumer have the permission to edit their own password only. The server supports adding 32 users at most. Add User Steps 1.

  • Page 60: Display Cofiguration

    Intelligent Fusion Server User Manual Figure 5-11 User Management Interface 2. Click , and modify admin password in the popup dialogue box. Figure 5-12 Modify User 3. Click OK. 5.3.6 Display Cofiguration Configure the search conditions for smart search function. For example, if you do not enable Display Gender, there will be no gender option in search conditions.

  • Page 61: Live View Configuration

    Intelligent Fusion Server User Manual 5.3.7 Live View Configuration Configure the play performance of live view, image format and saving path of manually captured pictures. Steps 1. Go to System Management → System Configuration → Live View . Figure 5-14 Live View Configuration Interface 2.

  • Page 62: Restore Default

    Intelligent Fusion Server User Manual Figure 5-15 Person Pattern Configuration Interface 2. Enter Map Name and Note Information. 3. Click Configure Map to upload a map. 4. Click OK. 5.3.9 Restore Default Before You Start The cluster has been disbanded. Note There are two types of restoration, including restore and default.

  • Page 63: Log Search

    Intelligent Fusion Server User Manual 5.4 Log Search Log includes running log, alarm log and operation log. The server supports log searching and exporting. Running Log Records server running information. Alarm Log Records server alarm information. Operation Log Records server operation information in Wed interface. Steps 1.

  • Page 64: Online User

    Intelligent Fusion Server User Manual Figure 5-18 Select Uploading Files 3. Click Browse to upload updating files, and then click Next. 4. Click OK. Note The device will reboot after updating completed. 5.6 Online User Check total quantity of users and real-time online users by click in the top-right corner of the interface.
  • Page 65 UD17649B...

This manual is also suitable for:

Ds-ix2001-a3uxDs-ix2003-a3uDs-ix2003-a3ux

Table of Contents