HIKVISION DS-TP50-12DT User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Server
  5. DS-TP50-12DT
  6. User manual

HIKVISION DS-TP50-12DT User Manual

Terminal server
Hide thumbs
Table of Contents

Advertisement

Quick Links

DS-TP50-12DT Terminal Server
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-TP50-12DT and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-TP50-12DT

Summary of Contents for HIKVISION DS-TP50-12DT

  • Page 1 DS-TP50-12DT Terminal Server User Manual...
  • Page 2 INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
  • Page 3 DS-TP50-12DT Terminal Server User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
  • Page 4 DS-TP50-12DT Terminal Server User Manual Safety Instructions  Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.  In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.

  • Page 5: Table Of Contents

    DS-TP50-12DT Terminal Server User Manual Table of Contents Chapter 1 Key Features ....................... 6 Chapter 2 Introduction and Interfaces..................7 Chapter 3 Getting Started ......................9 3.1 Starting Up and Shutting Down ....................9 3.1.1 Start Up ........................... 9 3.1.2 Shutt Down ........................9 3.1.3 Reboot ..........................
  • Page 6 DS-TP50-12DT Terminal Server User Manual 8.3 HDD Detection ........................40 8.3.1 S.M.A.R.T Settings ......................40 8.3.2 Bad Sector Detection ....................40 8.4 Video Parameter Settings ...................... 41 8.5 Holiday Settings ........................42 8.6 Record Schedule Settings ....................... 43 8.7 Alarm Input Recording Settings ..................... 45 Chapter 9 Serial Port Settings ....................

  • Page 7: Chapter 1 Key Features

     Easy-to-dismounting design makes HDD convenient to maintenance.  Low consumption and lower heat generation  GPS time synchronization and speed test within a section are supported.  Operable via Web.  Provides SDK for developing. For SDK programing manual, refer to Hikvision official website: http://www.hikvision.com/en/download_83.html.

  • Page 8: Chapter 2 Introduction And Interfaces

    Chapter 2 Introduction and Interfaces Purpose: DS-TP50-12DT as a traffic dedicated terminal server provides multiply features, including video management, traffic data management, video and audio decoding, picture processing, network transmission, etc. It integrates 16 network ports and 2 fiber ports, effectively meets the demands of distributed storage and accessing to surveillance management platform.
  • Page 9 DS-TP50-12DT Terminal Server User Manual Table 2-1 Description of Front Panel No. Name Description RS-485 4 × RS-485 half-duplex interface. RS-232 1 × RS-232. Audio input/output 1 × audio input/output. Alarm input/output 4 × alarm input/output. Power output 12/5 VDC (Consumption of 12 VDC ≤ 15 W. 5 VDC ≤...

  • Page 10: Chapter 3 Getting Started

    DS-TP50-12DT Terminal Server User Manual Chapter 3 Getting Started 3.1 Starting Up and Shutting Down Purpose: Proper startup and shutdown procedures are crucial to expanding the life of the device. 3.1.1 Start Up Before you start: 1. Fix the device in an equipment cabinet.

  • Page 11: Set The Admin Password

    DS-TP50-12DT Terminal Server User Manual For Windows 10 operation system, to access the terminal server via Internet Explorer 10, you need to Run IE10 as an Administrator. 3.3 Set the Admin Password Purpose: For the first-time access, you need to activate the device by setting an admin password. No operation is allowed before activation.

  • Page 12: Remote Operation Introduction

    DS-TP50-12DT Terminal Server User Manual Figure 3-2 Installing Plug-in 3.4 Remote Operation Introduction Purpose: Embedded WEB feature enables the device to be operable via internet explorer. After successful login, you can see five items are list in the menu bar, including Live View, Playback, Traffic, Log and Configuration.
  • Page 13 DS-TP50-12DT Terminal Server User Manual Figure 3-4 Live View Interface...

  • Page 14: Playback Interface

    DS-TP50-12DT Terminal Server User Manual Table 3-1 Live View Interface Description No. Name Description Camera List List the analog cameras and added IP cameras. Live View Window Display the live view image of the cameras. PTZ Control Panel PTZ control panel for rotating speed dome.
  • Page 15 DS-TP50-12DT Terminal Server User Manual Figure 3-5 Playback Interface Table 3-3 Playback Interface Description No. Name Description Camera List List the enabled analog cameras and added IP cameras. Playback Window Display the playback image. Playback Status Show the playback status, including playback camera No.

  • Page 16: Traffic Interface

    DS-TP50-12DT Terminal Server User Manual Table 3-4 Playback Control Bar Description Icon Description Icon Description Split the playback window into 1 Stop playback for all cameras. window, 4 windows or 9 windows. Start/pause playback for selected Capture pictures for the selected camera.

  • Page 17: Configuration Interface

    DS-TP50-12DT Terminal Server User Manual You can review the device status of a certain period by searching logs. Figure 3-7 Log Interface Table 3-6 Log Interface Description No. Name Description Search Results Display the log search results. Search Conditions Configure log search conditions.
  • Page 18 DS-TP50-12DT Terminal Server User Manual Table 3-7 Configuration Interface Description No. Name Description Menu List Display the main menu and sub-menu. Parameter Area Shown or configure parameters of a certain menu.

  • Page 19: Chapter 4 Network Settings

    DS-TP50-12DT Terminal Server User Manual Chapter 4 Network Settings Purpose: Guarantee the network connection between your computer and the device is correct, thus you can control the device remotely. 4.1 External Network Settings Step 1 Go to Configuration > Remote Configuration > Network Settings > External Network Settings.

  • Page 20: Internal Network Settings

    DS-TP50-12DT Terminal Server User Manual 4.2 Internal Network Settings Purpose: You can configure the IP address for the network interfaces. The default IP address is 192.0.0.64. Step 1 Go to Configuration > Remote Configuration > Network Settings > Internal Network Settings.
  • Page 21 DS-TP50-12DT Terminal Server User Manual Figure 4-3 DDNS Settings Step 2 Select Enable DDNS. Step 3 Select the DDNS Type. Three different DDNS types are selectable: DynDNS, PeanutHull, and NO-IP.  DDNS Type: DynDNS 1) Enter Server IP for DynDNS server.

  • Page 22: More Settings

    DS-TP50-12DT Terminal Server User Manual Figure 4-5 PeanutHull 2) Click Save to save the settings.  DDNS Type: No-IP 1) Enter Server IP address for NO-IP. 2) In the Domain text field, enter the domain obtained from the NO-IP website (www.no-ip.com).

  • Page 23: Port Settings

    DS-TP50-12DT Terminal Server User Manual 4.4.1 Port Settings Step 1 Go to Configuration > Remote Configuration > Network Settings > Network Port Settings. Figure 4-7 Network Port Configuration Step 2 Edit the SDK Port, RTSP Port and HTTP Port.  SDK Port: Port for platform to communicate with the device.

  • Page 24: Https Configuration

    DS-TP50-12DT Terminal Server User Manual 4.4.3 HTTPS Configuration Purpose: HTTPS provides authentication of the web site and associated web server that one is communicating with, which protects against Man-in-the-middle attacks. Perform the following steps to set the port number of https.

  • Page 25: Static Router

    DS-TP50-12DT Terminal Server User Manual 1) Select the radio of Signed certificate is available, Start the installation direction. 2) Click Browse and import the certificate to the device and install it.  Option 3: Create the authorized certificate 1) Select the radio of Create the certificate request first and continue the installation.
  • Page 26 DS-TP50-12DT Terminal Server User Manual Figure 4-13 Add Step 3 Check Enable checkbox. Step 4 Enter Target Network Segment, Subnet Mask, and Gateway.  Target Network Segment: The network segment of target server.  Subnet Mask: subnet mask of target network segment.

  • Page 27: Chapter 5 Device Parameters

    DS-TP50-12DT Terminal Server User Manual Chapter 5 Device Parameters 5.1 Device Information Purpose: You can enter Device Information interface to view the basic information of device. Step 1 Go to Configuration > Remote Configuration > Device Parameters > Device Information.

  • Page 28: Dst Settings

    DS-TP50-12DT Terminal Server User Manual Figure 5-2 Time Settings Step 2 Select Time Zone from the dropdown list. Step 3 Select the clock synchronization mode as NTP, Manual Time Synchronization or GPS Time Synchronization.  NTP Enter NTP Server, NTP Port and Interval time.

  • Page 29: Other Traffic Settings

    DS-TP50-12DT Terminal Server User Manual Step 2 Check the checkbox of Enable DST. Step 3 Set Start Time, End Time, and DST Bias. Step 4 Or you can manually check the Enable DST checkbox, and then you choose the date of the DST period.
  • Page 30 DS-TP50-12DT Terminal Server User Manual Level 3: Three terminal servers can receive pictures from one traffic camera. They are equal to cameras.  Checkpoint Video Linkage: Enable: When searching traffic data in Traffic interface, you can play and export checkpoint linked video.
  • Page 31 DS-TP50-12DT Terminal Server User Manual When you search the violation pictures, you can view the violation video as while. In order to keep the violation video completeness, set the all-day record schedule for cameras.  Mark Picture with: Add Time Synchronization Mark or add Security Code to pictures. The two items are written in binary code and they are invisible.

  • Page 32: Chapter 6 Camera Management

    DS-TP50-12DT Terminal Server User Manual Chapter 6 Camera Management Purpose: Up to 12 smart IP cameras can be add to the device. This makes managing 12 lanes possible. Step 1 Go to Configuration > Remote Configuration > Camera Management > IP Camera.
  • Page 33 DS-TP50-12DT Terminal Server User Manual IP cameras have the same password with the device can be connected successfully. Figure 6-2 Quick-Scan Step 3 Optionally, you can click to select an added IP camera, and click Modify, Delete or Reboot to...

  • Page 34: Chapter 7 Camera Settings

    DS-TP50-12DT Terminal Server User Manual Chapter 7 Camera Settings 7.1 Display Settings Purpose: You can configure parameters of OSD (On Screen Display) menu. Step 1 Go to Configuration > Remote Configuration > Camera Settings > Display Settings. Figure 7-1 Display Settings Step 2 Select camera to configure.

  • Page 35: Monitoring Spot Information Settings

    DS-TP50-12DT Terminal Server User Manual Figure 7-2 Text Overlay Settings Step 2 Select camera to configure in Select Camera dropdown list. Step 3 Enter contents in the four Text Contents. Step 4 Check the checkbox of text content you want to display.
  • Page 36 DS-TP50-12DT Terminal Server User Manual Figure 7-3 Monitoring Spot Information Step 2 Select camera to configure in Select Camera dropdown list. Step 3 Select Camera Type as Video Surveillance Camera or Intelligent Traffic Camera. The default Camera Type is Video Surveillance Camera.

  • Page 37: Image Collage Parameters

    DS-TP50-12DT Terminal Server User Manual 7.4 Image Collage Parameters Purpose: Configure image collage layout and other parameters. Step 1 Go to Configuration > Remote Configuration > Camera Settings > Image Collage Parameters. Step 2 Select camera to configure. Step 3 Set Image Collaging as Enable.

  • Page 38: Alarm Output

    DS-TP50-12DT Terminal Server User Manual Configure the Interaction Mode between terminal server and traffic cameras. Step 1 Go to Configuration > Remote Configuration > Camera Settings > Interaction Configuration. Figure 7-4 Interaction Configuration Step 2 Select camera to configure in Select Camera dropdown list.
  • Page 39 DS-TP50-12DT Terminal Server User Manual Figure 7-5 Alarm Output Step 2 Select Alarm Output No. in the dropdown list. Step 3 Select the Dwell Time. Thus the device sends out alarm output signal for the set time. Step 4 Enter Alarm Name.

  • Page 40: Chapter 8 Record And Capture Settings

    DS-TP50-12DT Terminal Server User Manual Chapter 8 Record and Capture Settings 8.1 HDD Initialization Purpose: Initialize the HDD before you use it. HDD amount varies according to different models. You can refer to specification for details. Step 1 Go to Configuration > Remote Configuration > HDD Management > Basic Settings.

  • Page 41: Hdd Detection

    DS-TP50-12DT Terminal Server User Manual Step 2 Enter the Picture Quota in the text field. The other HDD capacity is for video files. Step 3 Click OK to save the settings. 8.3 HDD Detection Purpose: The device provides the HDD detection function such as the adopting of the S.M.A.R.T and the Bad Sector Detection technique.

  • Page 42: Video Parameter Settings

    DS-TP50-12DT Terminal Server User Manual Figure 8-4 Bad Sector Detection Step 2 Select the HDD No. in the drop-down. Step 3 Choose Detection Type as Detect All or Key Area Detection. Step 4 Click the Start button to start the detection. You can pause or cancel the detection.

  • Page 43: Holiday Settings

    DS-TP50-12DT Terminal Server User Manual Figure 8-5 Video Settings Step 2 Select the camera to configure from the Select Camera dropdown list. Step 3 Select stream to configure as Main Stream (Normal), Sub-stream, or Main Stream (Event).  Main Stream (Normal): Stream for normal recording.

  • Page 44: Record Schedule Settings

    DS-TP50-12DT Terminal Server User Manual Figure 8-6 Holiday Settings Step 2 Click the icon after a holiday to enter Edit Holiday interface. Up to 32 holidays can be configured. Figure 8-7 Edit Holiday Step 3 Edit Holiday Name. Step 4 Check the Enable Holiday checkbox.
  • Page 45 DS-TP50-12DT Terminal Server User Manual Figure 8-8 Record Schedule Step 2 Select camera to configure in the Select Camera dropdown list. Step 3 Check the checkbox of Enable Schedule. Step 4 Click to configure record schedule. Figure 8-9 Edit Record Schedule Step 5 Select a day in a week to configure.

  • Page 46: Alarm Input Recording Settings

    DS-TP50-12DT Terminal Server User Manual  Alarm: Alarm triggered recording.  Segment Record: Up to 8 time segments can be set in a day. Device records only in set time segments. 1) Set the Start Time, End Time, and Record Type for a time segment.
  • Page 47 DS-TP50-12DT Terminal Server User Manual Figure 8-10 Alarm Input Settings Step 2 Select Alarm Input No. in the dropdown list. Step 3 Select Alarm Type as NO (normally open) or NC (normally closed) for alarm type.  NO: Alarm linking method and alarm recording are triggered when the alarm input is closed.
  • Page 48 DS-TP50-12DT Terminal Server User Manual Figure 8-11 Arming Time 1) Select a day in a week to configure. 2) Up to 8 time segments are provided. Set the Start Time and End Time for one or more time segments. 3) Select day(s) in Copy to Week and click Copy, thus to copy the schedule to other days.

  • Page 49: Chapter 9 Serial Port Settings

    DS-TP50-12DT Terminal Server User Manual Chapter 9 Serial Port Settings Purpose: Configure RS-232 serial port and RS-485 serial port. 9.1 RS-232 Serial Port Purpose: Connect the RS-232 serial interface in device rear panel with the one on computer. Thus device can communicate with computer.
  • Page 50 DS-TP50-12DT Terminal Server User Manual Figure 9-2 RS-485 Settings Step 2 Select Serial Port No., Baud Rate, Data Bit, Stop Bit, Parity and Flow Control. Make sure the parameters are exactly the same with the connected device. Step 3 Click Save to save the settings.

  • Page 51: Chapter 10 Backup Configuration

    DS-TP50-12DT Terminal Server User Manual Chapter 10 Backup Configuration 10.1 USB Backup Settings Purpose: You can export data to USB backup device. Before you start: Insert a USB backup device into the USB interface in rear panel. Step 1 Go to Configuration > Remote Configuration > Backup Configuration > USB Backup Settings.

  • Page 52: Web Backup Settings

    DS-TP50-12DT Terminal Server User Manual Figure 10-2 License Plate Picture Name 4) Click to select contents. The selected contents are list in the text filed. And the text filed is the license plate picture name. If you want to add other contents that is not provided in the list, you can input the contents in the textfield.
  • Page 53 DS-TP50-12DT Terminal Server User Manual Figure 10-3 Web Backup Step 2 Click the text field after the License Plate Picture Name. The following menu pops up. Figure 10-4 License Plate Picture Name Step 3 Edit the saving path and file name. We can turn to Step 5 in 10.1 USB Backup Settings for reference.

  • Page 54: Chapter 11 Uploading Data

    DS-TP50-12DT Terminal Server User Manual Chapter 11 Uploading Data 11.1 Host Settings Purpose: Configure the Remote Host settings to upload data to Remote Host, including iVMS-8600 and third-party platforms. Step 1 Go to Configuration > Remote Configuration > Remote Host > Host Settings.

  • Page 55: Ftp Settings

    DS-TP50-12DT Terminal Server User Manual The default Port for SDK Protocol and Private Protocol are 5650 and 5682 separated. Step 5 Select Data Type to upload in the dropdown list. Step 6 You can select Upload Historical Data and Upload No-Plate Data as Enable to upload historical data and No-plate data.
  • Page 56 DS-TP50-12DT Terminal Server User Manual Figure 11-3 Custom Settings Step 2 Select FTP Server 1 tab or FTP Server 2 tab. You can enable both of them or one of them. The Custom Parameters interface is reserved. Step 3 Select Enable in FTP dropdown list.

  • Page 57: Data Uploading Configuration

    DS-TP50-12DT Terminal Server User Manual Figure 11-4 Data Type Items Step 9 Click OK to save the settings. 11.3 Data Uploading Configuration Purpose: Set parameters for uploading historical files and re-uploading files to Remote Host. Before you start:  To upload data to remote host, enable the Upload Historical Data function in Host settings first.
  • Page 58 DS-TP50-12DT Terminal Server User Manual Step 3 Select uploading Remote Host as Remote Host 1, Remote Host 2, FTP Uploading Host 1, or FTP Uploading Host 2. Configure the four host’s parameters before selecting Remote Host as any of them. For detailed steps, please refer to 11.1 Host Settings and 11.2 FTP Settings.

  • Page 59: Chapter 12 Status Information

    DS-TP50-12DT Terminal Server User Manual Chapter 12 Status Information 12.1 Server Status Purpose: You can view the network status, server working status, and network uploading status. Step 1 Go to Configuration > Remote Configuration > Status Information > Server Status.
  • Page 60 DS-TP50-12DT Terminal Server User Manual Figure 12-2 Camera Status Step 2 Select camera to view status in Select Camera dropdown list. Step 3 Select the Traffic Flow Statistics, Front-End Device Status, or Camera Management Status to view camera status.  Traffic Flow Statistics: Shows the Average Speed, Traffic Flow, Lane Occupancy, and Time Interval of Vehicle Head information.

  • Page 61: Chapter 13 Other Settings

    DS-TP50-12DT Terminal Server User Manual Chapter 13 Other Settings 13.1 User Management Purpose: You can add, edit, and delete users. Step 1 Go to Configuration > Remote Configuration > User Management. Figure 13-1 User Management 13.1.1 Adding a User Step 1 Click Add to enter the Add user interface.

  • Page 62: Modifying A User

    DS-TP50-12DT Terminal Server User Manual STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

  • Page 63: Deleting A User

    DS-TP50-12DT Terminal Server User Manual Figure 13-4 Modify a User Step 3 Modify the User Name, Password, and then select User Type. STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 64: Maintenance

    DS-TP50-12DT Terminal Server User Manual  IP Conflicted: Duplicated IP address.  Illegal Access: Incorrect user ID or password.  Video Standard Dismatch: I/O video standards do not match.  Video Signal Exception: Unstable video signal.  Record/Capture Exception: Unable to recording or capture.

  • Page 65: Rebooting The Device

    DS-TP50-12DT Terminal Server User Manual Figure 13-6 Maintenance 13.3.1 Rebooting the Device  Click Reboot to reboot the device.  Optionally, check Auto-Reboot checkbox. Then the device reboots automatically 2 a.m. every day.  Optionally, check Reboot without HDD checkbox. Then the device reboots automatically when no HDD is detected.

  • Page 66: Repairing Database

    DS-TP50-12DT Terminal Server User Manual Figure 13-8 Default 13.3.3 Repairing Database Purpose: When errors happen, such as searching data failed, uploading data failed, etc., repairing database function is one of the method to recover the errors. Step 1 Click Repair to repair database.
  • Page 67 DS-TP50-12DT Terminal Server User Manual Figure 13-11 Remote Upgrade...

  • Page 68: Chapter 14 Blacklist And Whitelist

    DS-TP50-12DT Terminal Server User Manual Chapter 14 Blacklist and Whitelist Purpose: To manage special license plate numbers, you can add them into blacklist or whitelist. Go to Configuration > Remote Configuration > Blacklist/Whitelist. Figure 14-1 Blacklist/Whitelist 14.1 Adding List Step 1 Click Add.

  • Page 69: Deleting List

    DS-TP50-12DT Terminal Server User Manual 14.2 Deleting List Step 1 Check the checkboxes of blacklists and whitelists to delete. Step 2 Click Delete to delete them. 14.3 Searching List Purpose: You can search added license plate numbers in blacklist/whitelist. Step 1 Select List Type as Blacklist or Whitelist in drop-down list.

  • Page 70: Importing List

    DS-TP50-12DT Terminal Server User Manual  Arming Type: 1 refers to Whitelist. 2 refers to Blacklist.  Status: 0 refers to disabled. 1 refers to enabled. Table 14-1 Exported Excel Content. License Plate Number List Type Status HUA123 14.4.2 Importing List Purpose: You can import license plate numbers to blacklist or whitelist in batch.

  • Page 71: Chapter 15 Camera Matching

    DS-TP50-12DT Terminal Server User Manual Chapter 15 Camera Matching 15.1 Section Configuration Purpose: Calculate vehicle average speed within a road segment. There should be no fork with the road segment. Step 1 Go to Configuration > Remote Configuration > Camera Matching > Section Configuration.

  • Page 72: Camera Matching

    DS-TP50-12DT Terminal Server User Manual  Large-Size Vehicle Speed Limit: The value cannot be smaller than Large-Size Vehicle Speeding Percentage.  Large-Size Vehicle Exception Speeding Limit: The value must be larger than both Large-Size Vehicle Speeding Percentage and Large-Size Vehicle Speed Limit.
  • Page 73 DS-TP50-12DT Terminal Server User Manual  Video Linkage: Main channel and sub-channel must support license plate recognition feature. When the recognized license plate number of main channel and sub-channel matches, device will collage the captured pictures of main channel and sub-channel.
  • Page 74 UD09284B...

Table of Contents