Enable Frequency Alarm - HIKVISION DS-IX2001-A3U User Manual

Before You Start
A real-time or video record analysis task has been created, and its type is set as Video Structure.
Steps
1. Go to Target Arming → License Plate Arming , and check Enable.
Note
Import the template of license plate arming information to enable batch license plate arming.
Go to Export Arming List → Export Template to get templates.
2. Click Add, and enter License Plate No., Start Time, End Time and Note.
3. Click OK.

2.7 Enable Frequency Alarm

Frequency alarm is used to count the frequency of personnel's appearance in monitoring scenes.
An alarm will be triggered if the frequency reaches the configured threshold.
Before You Start
One or multiple cameras have been added and armed.
Steps
1. Go to System Management → System Configuration → Frequency .
2. Configure the parameters as below
Intelligent Fusion Server User Manual
Figure 2-30 License Plate Arming Interface
Figure 2-31 Add License Plate Arming
22