Table of Contents
Advertisement
46
ENGLISH
If electrolyte of the batteries immodestly get in your eyes, immediately rinse with plenty of clean water.
It will cause blindness or other hazards, should immediately go to the nearest hospital for treatment.
If electrolyte of the batteries immodestly glues on the skin or the clothes, immediately rinse with plenty of clean
water.
Otherwise it may hurt the skin.
Advice
Do not strike or drop the device;
Do not inflate before the cuff wraps around the limbs;
Do not inflect the cuff and the air tube forcibly.
Description of functions:
The Sphygmomanometer apply to measure the non-invasive blood pressure and SpO
of animal, uses three-user mode,
2
each user can store 100 items records of measurement results at most. Each record includes detailed measuring time,
systolic pressure, diastolic pressure, average pressure, pulse rate and record number, etc. With 2.8 inch color LCD screen,
clear interface, the function of data review is complete. User can implement ON/OFF, manual measuring, system setup,
parameters change and other operations with seven buttons which are located on the front panel of the device.
With timing shutdown function, if there is no operation and SpO
measurement, the device will automatically turn off after
2
2 minutes. With USB interface, Users can send measurement results to PC. Refer to the help or explication of the related
software for specific operation.
Purpose:
The device apply to measure the non-invasive blood pressure and SpO
(optional) of animal. Record parameter value of
2
blood pressure to provide the reference for the health care professional.
Warning
You must not perform NIBP measurements on animals with sickle-cell disease or under any condition which the
skin is damaged or expected to be damaged.
For a thrombasthemia animal, it is important to determine whether measurement of the blood pressure shall be
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CONTEC08A-VET and is the answer not in the manual?
Questions and answers
When I take the BP on my dog, it just keeps going and never gives a pressure. Cuff is on properly, is the right size and air plug is in securely. What **** I doing or not doing correctly?
Several factors could prevent the CONTEC08A-VET from providing a blood pressure reading on your dog despite proper cuff placement and secure connections:
1. Animal Condition: The device should not be used on animals with damaged skin, sickle-cell disease, or thrombasthemia without clinical evaluation.
2. Incorrect Cuff Size or Pressure: Ensure that the correct cuff size is used and that it is not overinflated, as this may prevent accurate readings.
3. Movement or Stress: If the animal is moving or stressed, it can interfere with measurements. Keep the animal calm and still.
4. Device Lifespan: If the device has exceeded its five-year useful life, it may no longer function properly.
5. Environmental Factors: Ensure the device is not used in conditions with flammable anesthetic gases or if liquid has entered the device.
6. Software or Connection Issues: If using the USB interface to transfer data, check the related software for proper operation.
If issues persist, consult the manual for troubleshooting or contact the service department.
This answer is automatically generated