Table of Contents
Advertisement
67
ENGLISH
• Excessive animal movement.
• External light.
• Improper SpO
probe installation or incorrect contact position of the patient.
2
• Temperature of SpO
probe(optimal temperature range: 28°C ~ 40°C).
2
• Place the SpO
probe on an limb that has a blood pressure cuff, arterial catheter, or intravascular line.
2
• Concentrations of dysfunctional hemoglobin, such as carboxyhemoglobin(COHb) and methemoglobin(MetHb).
• SpO
is too low, Bad circular perfusion of the part being measured.
2
• Intravascular staining agents (such as indocyanine green or methylene blue), skin pigmentation.
• It is required to use SpO
probe which is provided by our company, contact with our sale department when necessary.
2
Chapter 13
INSTALLATION OF THE SOFTWARE
13.1 Demand of Editor
Processor: Intel Celeron 2.5G or more
Operation System:Windows XP/Win7/Win8
EMS memory: 1GB and more
Hard Disk: 250G or more
Display: 17 inch or more
CD-ROM
USB: 2 or more
Resolution of printer: 600 DPI
13.2 Installation of Software
1. Place the CD-ROM in the CD-ROM compartment located on your computer.
2. If Auto Play for CDs is enabled, place CD in reader and follow instructions when they appear in the screen; otherwise
follow install instructions below:
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CONTEC08A-VET and is the answer not in the manual?
Questions and answers
When I take the BP on my dog, it just keeps going and never gives a pressure. Cuff is on properly, is the right size and air plug is in securely. What **** I doing or not doing correctly?
Several factors could prevent the CONTEC08A-VET from providing a blood pressure reading on your dog despite proper cuff placement and secure connections:
1. Animal Condition: The device should not be used on animals with damaged skin, sickle-cell disease, or thrombasthemia without clinical evaluation.
2. Incorrect Cuff Size or Pressure: Ensure that the correct cuff size is used and that it is not overinflated, as this may prevent accurate readings.
3. Movement or Stress: If the animal is moving or stressed, it can interfere with measurements. Keep the animal calm and still.
4. Device Lifespan: If the device has exceeded its five-year useful life, it may no longer function properly.
5. Environmental Factors: Ensure the device is not used in conditions with flammable anesthetic gases or if liquid has entered the device.
6. Software or Connection Issues: If using the USB interface to transfer data, check the related software for proper operation.
If issues persist, consult the manual for troubleshooting or contact the service department.
This answer is automatically generated