Advertisement
A s s e m b l y
You must review and follow the instructions in this Owner's Manual. If you do not assemble and use the
PowerLIFT Squat/Calf Station according to these guidelines, you could void the Body-Solid warranty.
Assembly of the PowerLIFT Squat/Calf Station takes professional installers about 30 minutes to complete. If
this is the first time you have assembled this type of equipment, plan on significantly more time.
Professional installers are recommended.
However, if you acquire the appropriate tools and follow the assembly steps sequentially, the process will take
time, but is fairly easy.
Required Tools
The tools that you must obtain before assembling
the PowerLIFT Squat/Calf Station include:
2.5mm Hex Key
5mm Hex Key
6mm Hex Key
10mm Open-End Wrench
17mm Open-End Wrench
19mm Open-End Wrench
17mm Box Wrench
19mm Box Wrench
Rubber Mallet
Installation Requirements
Follow these installation requirements when assembling
the PowerLIFT Squat/Calf Station:
Fill out and mail warranty card.
•
Set up the PowerLIFT machine on a solid, flat surface.
•
A smooth, flat surface under the machine helps keep
it level. A level machine has fewer malfunctions.
Provide ample space around the machine. Open
•
space around the machine allows for easier access.
Insert all bolts in the same direction. For aesthetic
•
purposes, insert all bolts in the same direction
unless specified (in text or illustrations) to do otherwise.
•
Leave room for adjustments. Tighten fasteners such as
bolts, nuts, and screws so the unit is stable, but leave
room for adjustments. Do not fully tighten fasteners
until instructed in the assembly steps to do so.
Do not fully tighten bolts until
instructed to do so.
Note: Due to continuing product improvements, specifications and
designs are subject to change without notice.
CAUTION: Obtain assistance! Do not attempt to assemble
the PowerLIFT Gym by yourself. Review the Installation
Even though we have prepared this manual with extreme care, neither the
publisher nor the author can accept responsibility for any errors in, or
omission from, the information given.
I n s t r u c t i o n s
Assembly Tips
•
The PowerLIFT Squat/Calf Station comes in one
box. Be careful to assemble components in the
sequence presented in this guide.
•
With so many assembled parts, proper alignment and
adjustment is critical. While tightening the nuts and
bolts, be sure to leave room for adjustments.
•
Read all "Notes" on each page before beginning
each step.
•
While you may be able to assemble this PowerLIFT
unit using the illustrations only, important safety
notes and other tips are included in the text.
IMPORTANT!
•
Before you begin you should look at pages 11 and 12.
This is a quick reference guide that shows all hardware
parts (in actual size) along with the corresponding
key numbers on the assembly instructions.
2
Advertisement
