Table of Contents
Advertisement
Quick Links
If you have a problem, question, or request, call
your local dealer, or Coalesse at 1.800.627.6770
Or visit our website: www.coalesse.com
©
2010 Coalesse
San Francisco, California U.S.A.
Printed in U.S.A.
1.
Remove all glides or casters.
2.
Remove the screws in the arms (4) in both sides.
3.
Remove the staples holding the black fabric.
®
Archipelago
- Seat Replacement
HEX 4MM: for assembly screws 1/34"
PH2: for assembly screws 6/8" and 7/8"
PH3: for assembly screws 2-1/2"
and Casters
Staples 3/8"
Remove Staples
PH2 & PH3
HEX 4MM
Page 1 of 3
939501989 Rev A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Coalesse Archipelago
Summary of Contents for Coalesse Archipelago
- Page 1 Remove the staples holding the black fabric. PH2 & PH3 HEX 4MM If you have a problem, question, or request, call your local dealer, or Coalesse at 1.800.627.6770 Or visit our website: www.coalesse.com © 2010 Coalesse Page 1 of 3 San Francisco, California U.S.A.
- Page 2 Remove (3) screws. Position the new seat. Remove the staples. Align seat with base (sides and back). Remove (2) screws. Install (2) screws (approximately 2-1/2”). If a bracket is present, remove one screw in each side. Page 2 of 3 939501989 Rev A...
- Page 3 Insert (2) screws (approximately 3/4”). Install black fabric. Pull fabric to eliminate wrinkles on seat. Insert (4) screws (approximately 1-3/4”). Use staples to snug fabric. Assemble (4) casters or glides with (4) screws (approximately 1-3/4”) Use staples to snug fabric. on both sides.
Need help?
Do you have a question about the Archipelago and is the answer not in the manual?
Questions and answers