Manually Overriding A Setpoint; Changing A Schedule - valent VPR Series Controls Instruction Operation & Maintenance

Manually Overriding a Setpoint

Many setpoints can be manually overridden for
troubleshooting. Refer to the
11 for a list of setpoints that can be manually
overridden. Refer to the
on page 52 for definitions of manual override
points.
1. Push any button on the LCD interface to
refresh the display. If the main menu is not
shown, press the
MENU
main menu.
2. Press Enter to select
Valent LCD Interface
POINTS
SCHEDULING
SYSTEM SETTINGS
3. Press ► to navigate to the
OVERRIDES screen.
MANUAL OVERRIDES
OVERRIDE MODE
TIME REMAINING
UNIT ENABLE
SUPPLY FAN
SUPPLY OVERRIDE
SUPPLY SPEED
MENU PREV
4. On the MANUAL OVERRIDES
OVERRIDE MODE is underlined. Press
Enter.
5. Press ▲ to change the value to Enabled.
Press Enter to accept the change.
6. Use ▲ and ▼ to navigate to the setpoint to
override. Press Enter.
7. Use ▲ and ▼ to change the value of the
selection or to change the digit. If applicable,
use ◄ and ► to move left and right between
digits.
8. When the setpoint is modified to the desired
value, push Enter to update the controller.
Wait a few seconds for the value to update.
The controller does not need to be restarted
for the override to take effect.
Valent Controls IOM
LCD Map
on page
Manual Override
section
button to return to the
POINTS .
MANUAL
DISABLED
0 MIN
OFF
OFF
OFF
50 %
NEXT LAST
screen,
Manual Override mode is in effect for 4 hours,
after which setpoints return to the previous state
or Auto. To cancel the manual override mode
before it expires, change
False. The TIME REMAINING
much time remains before the override mode
expires automatically.

Changing a Schedule

The default schedule of the controller is 24-hour
Occupied.
1. Push any button on the LCD interface to
refresh the display. If the main menu is not
shown, press the
main menu.
2. Press ▼ to move the underline cursor to
SCHEDULING and press
Valent LCD Interface
POINTS
SCHEDULING
SYSTEM SETTINGS
3. When the
SCHEDULE
Enter again. The
screen is then displayed with a seven-day,
24-hour grid.
SCHEDULE DETAILS
TIMES S
8:00 AM ___
9:00 AM
10:00 AM
11:00 AM
SETTING:
MENU
4. Using the left and right arrows, move the
visible curser to the day a schedule change
is desired. Press
event (if cursor is located on an existing
event) or create a new one (if cursor is
located on an open time slot).
7
OVERRIDE MODE to
point displays how
button to return to the
MENU
Enter.
menu is shown, press
SCHEDULE DETAILS
M T W T F
Enter to edit an existing
IOM-C1-0616
Part Number 474626
S
CANC