Platform - valent VPR Series Controls Instruction Operation & Maintenance

6. Click on the Connect button to establish the
connection between the computer (via UMT)
and the controller.
The UMT software package will connect to the
selected unit and download data from the
individual station. Monitor the progress bar on
the screen for the status of this operation. The
download process should take several minutes.
Valent Controls IOM

Platform

When logging into the Platform option, the
Station Director tab is the first screen displayed.
UMT Map
Refer to the
list of all points accessible on the UMT.
Platform Administration
Changing the IP Address
Use the TCP/IP Configuration utility to edit the
network address and related parameters for the
controller.
WARNING:
Setting the IP Address to an incorrect value may
cause the controller to lock up and will require
replacing the controller. Make sure the IP
address, gateway, and subnet mask are set
correctly before saving the new settings.
The controller ships with the following default
settings:
JENESYS TCP/IP SETTINGS
IP ADDRESS:
SUBNETMASK:
GATEWAY:
MENU
16
on page 20 for a complete
192.168. 1.101
255.255.255. 0
192.168. 1. 1
SAVE
IOM-C1-0616
Part Number 474626