Factory Configuration - valent VPR Series Controls Instruction Operation & Maintenance

Water Source Heat Pump Compressor Off Water Valve
Position
For a unit with a water source heat pump, this
defines the position of the water valve when the
compressors are off.
Water Source Heat Pump Condenser Temperature
Setpoint
Consult the factory to adjust this setpoint.
Water Source Heat Pump Suction Temp Low Limit
If the suction temperature is equal to or less
than this setpoint, the unit will limit or lockout the
compressors.
Water Source Heat Pump Water Valve Max Closed
Position Setpoint
Sets the minimum water flow for the WSHP unit
coax coils. This setpoint applies to every
operating mode.

Factory Configuration

The following information pertains to the configuration of the system. Many of these items can be viewed
from the Factory Setup menu on the LCD or UMT. For more information, please consult the factory.

Communications Type

Damper Configuration

Supply Fan Configuration

CO2 Control

Exhaust Fan Control Type

Remote Damper Control

Pre-Heater

Airflow Monitoring Type

Heating Package

Cooling Package

Energy Recovery Configuration

Unit Type

Economizer

AMD Type
Valent Controls IOM
Winter Ramp Control Type
Selects whether the Winter Ramp mode, if
enabled and active, should modulated the
Supply Fan or Outdoor Air damper.
Winter Ramp OA Enable Setpoint
Sets the ambient temperature at which the
system allows winter ramp to be enabled.
Winter Ramp Type In Control
Indicates whether the unit is currently configured
to modulate the Supply Fan or Outdoor Air
damper when in Winter Ramp mode. See Winter
Ramp Control Type.

Web UI

Refrigerant Monitoring

Optimal Start/Stop

Heat Pump

Morning Warmup

Night Purge

Reheat Dehumidification

Heat Wheel Rotation Sensor

Space Setpoint

I/O Map

Sales Order Number

Tag

Software Version
51 IOM-C1-0616
Part Number 474626