Advertisement
Fan Filtration System
The SWC510 and SWC515 powder
Speed Adjustment
System Specifications
handling fan units are specifically
designed to provide controlled extract
Model:
SWC510/515
and filtration for the weighing cabinet
systems.
Volume Flow
340m³/Hr =95 ltr/sec
The fan unit consists of a box-section
Dimensions
Height: 520mm
housing with a centrifugal fan housed
in the base. Air is drawn through the
Depth: 375mm
top inlet and out through a 100mm
spigot on the side, via a safe-change
HEPA (High Efficiency Particulate
Width: 375mm
Arrestor) filter. The airflow speed is
adjustable from 0.01 to 0.1 m³/s.
Weight:
20kg (with Filter)
Once set, the speed control circuit will
Speed Control Dial:
maintain the required velocity.
Fan Type:
Centrifugal Fan
Speed adjustment
The fan unit itself is designed to be
Output
0.36KW (360 Watts)
located either next to, or under the
Anti Clockwise
=
Increase
cabinet system for which it is
Voltage, Europe 230V /1PH/50HZ
Flow
providing airflow. The fan unit can be
mounted on its side, if required, but
Current
2Amp Max Load
Clockwise
=
Decrease Flow
not in an inverted position. When
locating the fan unit, ensure that
Pressure Gauge
Noise Level
49dBA-63dBA
access for yearly maintenance is easy
as filter changes will have to be made.
Green Light
=
Filter Good
Red Light
=
Filter Full
Movement or relocation of the
fan unit must be carried out
under safety supervision due
to manual handling issues
10
Advertisement
