Briggs & Stratton 12kW Installation And Operation Manual page 10

All fossil fuel burning equipment, such as standby generators (A), contains carbon monoxide (CO) gas in the engine exhaust.
CO gas is odorless, colorless and tasteless and is unlikely to be noticed until a person is overcome. CO gas can kill you, so it
is required that the following is included as part of the installation.
• Install the generator (A) outdoors in an area that will not accumulate deadly exhaust gas (H).
• DO NOT install the generator (A) where exhaust gas (H) can accumulate and enter inside or be drawn into a potentially
occupied building or structure.
• In many states it is required by law to have a Carbon Monoxide (CO) detector that works in your home. Carbon monoxide
detector(s) MUST be installed and maintained indoors according to the manufacturer's instructions / recommendations. A
CO detector is an electronic device that detects hazardous levels of CO. When there is a buildup of CO, the detector will
alert the occupants with an alarm and by flashing a visual indicator light. Smoke alarms cannot detect CO gas.
• Your neighbor(s) home can be exposed to the engine exhaust (H) from your standby generator (A) and must be
considered when installing your standby generator.
• Make sure exhaust gas (H) is kept away from:
(B) Windows
(C) Doors
(D) Ventilation Intakes
(E) Soffit Vents
(F) Garage Doors
(G) Crawl spaces or other openings that can allow exhaust gas to enter inside or be drawn into a potentially occupied building
or structure.
10