Snap-On Zeus Getting Started Pack page 4

Scanner
Scanner makes vehicle communication easy, by providing full
scanning functionality including these features and more!
Intelligent Diagnostics
Data Graphing - View up to 16 graphs at once for data comparison analysis
Code Scan - Scan multiple systems and check readiness monitors in a single touch
Tests/Resets - Perform functional component tests, and adaptive relearns
Scanner Basics
1. Select Scanner
2. Connect the Compact Scan Module (CSM) to the vehicle.
3. Select the vehicle make, then as prompted identify the vehicle.
4. Select a system (e.g. Code Scan, Engine, Transmission, Body, etc.).
5. Select a function/test (e.g. Codes Menu, Data Display, Functional Tests, etc.).
Wi-Fi is required to use
Scanner Demo / Intro to Intelligent Diagnostics
Explore Scanner and Intelligent Diagnostics without actually connecting to a
vehicle. The built-in demonstration gets you up-to-speed by allowing you to
navigate hands-on through simulated Scanner operations, including vehicle
1. Select Scanner
2. Select Demonstration from the vehicle make menu.
3. Select 2016 Chevrolet Tahoe North American Demo, then OK
4. Select Continue
5. elect Engine > Codes Menu > Display Codes > DTC Display, then follow
S
along with the Intelligent Diagnostics demo screens to get familiar with all the
features.
Important
*Secured Gateway Equipped Vehicles
To learn more about obtaining authorization:
From the Home screen select System Settings > Get Connected
or
Visit Snapon.com/gateway
, from the Home screen.
Intelligent Diagnostics.
from the Home screen, then select Continue at the
.