Getting Started
2
1
4
1. Align the tabs on the battery pack
with the slots in the battery
compartment, then pivot the battery
pack down into position, until seated.
2. Tighten the screws.
2
Note - Do not overtighten the screws.
3. Connect the AC power supply, to
3
charge the battery.
The power supply jack is located in
the left hand grip under the
protective cover.
4. Press the Power
***IMPORTANT***
5
Turn Wi-Fi on to use Intelligent
Diagnostics, Quick Lookups and
SureTrack.
Select the wireless connection
icon from the Windows
wireless network from the list, or
select Open Network and Sharing
Center to setup a new connection.
5. Select a function (e.g. Scanner,
Guided Component Tests,
6
Quick Lookups, SureTrack).
navigate menus on the touch screen.
6. To scan a vehicle, connect the
Compact Scan Module (CSM) to the
vehicle's Data Link Connector (DLC).
Note - When you connect the CSM to an
OBD-II vehicle, the CSM is powered by the
vehicle.
button.
taskbar
®
Need help?
Do you have a question about the Zeus and is the answer not in the manual?
Questions and answers