probst SH-1000-MINI Operating Instructions Manual page 10

Operating Instructions
The device must never be placed on the suction plate when not in
use, otherwise the suction plate will be damaged! Instead, turn the
side handles 180° and use them as a stand.
Do not lift any components off-centre (always in center ogf gravity). 2904.0383
9 / 34
Safety
It is not allowed to position suction plates off-centre,
when using a spreader bar/travers on the vacuum lifting
device.
Load securing with the use of a spreader bar (TRA) on
the vacuum lifting device:
- The load-securing-chains must fit tightly to the
load
Prohibition: load-securing chains must
-
never hang loose under the load!
V4
29040446 139x39
29040337 65x200 mm
(optional)
29040688 146x85 mmm
(optional)
GB