Table of Contents
Advertisement
Transport, Storage and Disposal
Auto-OFF function
The appliance switches off automatically
after the last action (depending on the
setting). From the factory, the appliance is
set at 30 minutes
■ Switch on the device.
■ Press the
simultaneously until
■ Press the
illuminates.
■ Press the
four switch-off times is set. The time is
displayed by the beans on display 9.
Display
fl ashing
■ Press the
setting.
28
Operating Instructions: Melitta
.
and
buttons
fl ashes.
button three times.
button until one of the
Time
30 minutes
(factory setting)
2 hours
4 hours
8 hours
button to confi rm the
Brewing temperature
From the factory, the brewing temperature
is set to Level 2 (medium
■ Switch on the device.
■ Press the
simultaneously until
■ Press the
illuminates.
■ Press the
button, until one of the
three brewing temperatures is set.
The temperature is shown by the beans
on display 9 (from
to
= high.).
■ Press the
button to confi rm the
setting.
Adjusting the grinding fi neness
The grinding fi neness was set before the
appliance was delivered. We therefore
recommend to only adjust the grinding
fi neness after about 1 0 00 coffee
preparations (about 1 year).
The grinding fi neness should only be
adjusted immediately after starting coffee
dispensing and only while the mill is
running.
■ Pull off the cover 14 to the right.
■ Start dispensing coffee.
■ Put the lever (Image E) in a desired
position (left = fi ne to right = coarse).
■ Insert the cover and swivel to the left
until it clicks in.
®
Solo
®
& Perfect Milk | 1830-0618 | 2018-08
).
and
buttons
fl ashes.
button four times.
= low
Advertisement
Table of Contents
