Melitta CAFFEO Solo Operating Instructions Manual
Hide thumbs
Also See for CAFFEO Solo:
- Operating instructions manual (247 pages) ,
- Operating instruction (215 pages) ,
- Operating instructions manual (14 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Melitta CAFFEO Solo
Summary of Contents for Melitta CAFFEO Solo
- Page 1 Operating Instructions...
-
Page 3: Safety Instructions
– Do not undertake any changes You must observe the safety to the appliance, its components instructions to avoid dangers. Melitta ® accepts no liability for damage caused or its accessories. by failure to observe the safety –... - Page 4 Warning! – Children must not play with the appliance. Cleaning and Risk of burning and scalding maintenance must not be Escaping fluids and steam may undertaken by children younger be very hot. Parts of the appliance than 8 years of age. Children also become very hot.
- Page 5 Drip tray with cup plate and coffee Appliance is heating grounds container as well as display Flashing up or coffee is being for full drip tray dispensed. Height-adjustable outlet Change the Melitta ® Illuminated Claris water filter ® Coffee quantity regulator Flashing Filter change in process.
-
Page 6: Before Using For The First Time
10 cm) to the sides. when illuminates on display 9. • Plug the power cable into a suitable • After using the appliance for the first power socket. time, insert the Melitta Claris water ® ® • Remove the lid from the bean filter if required (see page 19). - Page 7 Do not use any ground, glazed, the need to be descaled in due time. From caramelised or otherwise sugar-coated the factory, it is set at water hardness 4. coffee beans. After inserting a Melitta Claris water ® ® filter, it is automatically set at hardness Setting the dispensed quantity and level 1.
-
Page 8: Setting The Water Hardness
Setting the water hardness Inserting the water filter flashes during the entire changing The appliance includes a test strip to process. determine the water hardness. • Put the water filter in a glass with • Determine the hardness of the tap water tap water for several minutes before using the test strip. -
Page 9: Care And Cleaning
2 months or after 200 – Do not use a steam cleaner. brewed cups, however, at the latest when is lit up. Daily cleaning Only use Melitta cleaning tabs. ® • Wipe the outside of the appliance with a • Switch off the appliance. -
Page 10: Integrated Descaling Programme
("Setting • Place the coffee grounds container the water hardness" page 19). under outlet 2. Only use Melitta ANTI CALC. ® Cleaning phase 4 ( , the middle • Switch off the appliance. bean is flashing): •... -
Page 11: Other Settings
Descaling phase 2 ( Display Time When illuminates, proceed as follows: 5 minutes (factory setting) • Empty and reinsert the drip tray. • Rinse the water reservoir thoroughly. 15 minutes • Fill the water reservoir with tap water up to the max. mark. 30 minutes •... -
Page 12: Transport, Storage And Disposal
Brewing temperature • Remove the water filter if necessary ("Water hardness and filter" page 18) From the factory, the brewing temperature and keep it cool in a glass filled with tap is set to Level 2 (medium water. • Switch on the appliance. •... -
Page 13: Troubleshooting
Troubleshooting Fault Cause Solution Adjust the grinding fineness more coarse. Coffee only flows drop-by- Grinding fineness is too fine. Clean the brewing unit. drop. Perform a descaling or cleaning programme if necessary. Water tank not filled or Fill the water reservoir and make sure incorrectly inserted. - Page 14 01 32 A Thorpe Wood Business Park September 2013 from a dealer authorized due to his expertise Thorpe Wood by Melitta, we give a manufacturer’s guarantee based on the Peterborough PE3 6SR following conditions: United Kingdom 1.
- Page 15 Version 4.0 09/2016 1233-0816 Melitta Europa GmbH & Co. KG D-32372 Minden...
Need help?
Do you have a question about the CAFFEO Solo and is the answer not in the manual?
Questions and answers