APRILIA Pegaso 650 2005 Manual page 127

PEGASO 650
• Clamp the sleeve in vertical position.
•
Pour oil inside the stanchion, ensure it fills up all
damper rod channels.
•
Pump with the stanchion, ensure that oil completely
filled the damper rod.
• Insert the spring.
•
Insert the washer.
•
Install the spring preload spacer.
•
Start the plug onto stanchion tube, be careful not to
damage the O-ring. Tighten the plug to the specified
torque.
CYCLE PARTS
5 - 23