APRILIA Pegaso 650 2005 Manual page 35

GENERAL TECHNICAL INFORMATION
PEGASO 650
TIME SETTINGS
This mode allows you to set the clock.
The main page with "TIME SETTINGS" is displayed.
As soon as you enter this mode, indication of minutes
disappears and only hours are displayed.
Value increases every time the MODE selector is pressed to
the right, once the value reaches 12, it goes back to 0.
In the same way, value decreases every time the MODE
selector is pressed to the left, once the value reaches zero, it
goes to 59 when the MODE selector is again pressed to the
left.
A Confirmation signal stores the set value and lets you quit
clock setting mode.
As soon as you enter this mode, indication of hours
disappears and only minutes are displayed.
Minutes value increases every time the MODE selector is
pressed to the right, once the value reaches 59, it goes to 0
when the MODE selector is again pressed to the right.
In the same way, value decreases every time the MODE
selector is pressed to the left, once the value reaches zero, it
goes to 59 when the MODE selector is again pressed to the
left.
A Confirmation signal stores the set value and lets you quit
clock setting mode.
GEAR SHIFT THRESHOLD
This function allows you to set the value for the Gear shift
indicator threshold. The main page with "GEAR SHIFT
THRESHOLD" message is displayed.
Threshold value is increased by 100 RPM every time the
MODE selector is pressed to the right, vice versa, threshold
value is decreased by 100 RPM every time the MODE
selector is pressed to the left.
If the upper or lower limit is reached and you further press
the selector, nothing will happen.
Press the MODE selector to the centre position to end the
operation and store the set value, the index goes back to
zero and the instrument panel goes back to configuration
menu page.
When battery is connected for the first time, the instrument
panel sets to running-in rpm value, the next time battery is
connected it sets to last set value.
RUNNING-IN RPM: 5000
MINIMUM RPM: 4000
MAXIMUM RPM: 8000
When the set threshold is exceeded, the alarm light (3) on
the instrument panel flashes until the value goes below the
threshold.
2 - 16