PEGASO 650
•
Loosen and remove the three oil filter cover screws.
•
Remove the oil filter cover with gasket, collect the O-
ring.
•
Remove the oil filter.
•
Install a new oil filter.
•
Fit the oil filter cover and tighten the three screws.
•
Screw and tighten the oil drain plug.
•
Fill up with about 1500 cu.cm of engine oil (91.5 cu.in.).
•
Screw and tighten the plug/dipstick.
•
Start the engine and let it run for a few minutes. Stop
the engine and let it cool down.
•
Check engine oil level.
GENERAL TECHNICAL INFORMATION
2 - 39