APRILIA Pegaso 650 2005 Manual page 42

PEGASO 650
ECU errors
This page displays both current (live) errors and stored ones.
The following message is displayed:
•
Turn the key to stop
Once the key is turned off, the following message is
displayed:
• Turn the key to Drive
Once the key is turned on, the table of errors read by the
ECU is displayed. Turn the key to stop to quit, the following
message will be displayed:
•
Turn the key to stop to quit
ECU parameters
This page displays parameters read by the ECU. The
following message is displayed:
• Turn the key to stop
Once the key is turned off, the following message is
displayed:
•
Turn the key to Drive
Once the key is turned on, the following table is displayed.
Turn the key to stop to quit, the following message will be
displayed:
• Turn the key to stop to quit
CO adjustment
In this page the instrument panel increases or decreases the
CO rate. Press the UP or DOWN buttons on the control
switch to increase or decrease the value. The instrument
panel should display the set value; the ECU shall store the
set value upon key OFF.
At this stage, the rpm are displayed.
The following message is displayed:
•
Turn the key to stop
Once the key is turned off, the following message is
displayed:
• Turn the key to Drive
Once the key is turned on, the following message is
displayed, while waiting for the connection with the ECU:
•
Wait for the connection
Once connection is established, the following messages are
displayed:
•
Connection established
• Set value
• CO = !!!
•
Turn the key to stop to set in memory and exit
The value of the parameter setting the CO rate should be
within –127 and +128.
GENERAL TECHNICAL INFORMATION
2 - 23