APRILIA Pegaso 650 2005 Manual page 63

GENERAL TECHNICAL INFORMATION
• Remove both pins.
•
Remove the vibration damper.
•
Remove one pad at a time.
WARNING
Do not operate the brake lever when the pads
are not in place or the calliper pistons might
come off their housing, thus causing brake
fluid leakage.
•
Install two new pads, fit them so as the holes match
those on the calliper.
WARNING
Always change both pads and ensure they are
correctly in place inside the calliper.
•
Fit the vibration damper.
• Fit both pins.
•
Fit both split pins.
• Check brake fluid level.
2 - 44
PEGASO 650