Avaya M770 User Manual page 83

SVC failures
Too Long Frames
Total Errors
Total Frames
Total Frames Received
Total Octets
Total Packets
Total Rejected
Total Rx Frames
Total Traffic
Total Tx Frames OK
Unicast Packets
Unknown protocols In
VCI
VPI
Avaya M770 ATM Manager User Guide
The number of SVCs that have failed to be set up.
Total number of frames on the port with octet sizes
greater than the allowed value.
The total number of errors which have occurred on
the relevant ports.
The total number of frames on the ring.
The total number of frames of valid frame length
that have been received on the ports in this
module.
The total number of octets contained in the valid
frames that have been received on the ports in this
module.
The total number of packets of valid frame length
that have been received on the ports in this
module.
The total number of rejected CONFIGURE requests.
The total number of frames that have been received
on the Fast Ethernet ports.
The total number of Token Ring frames processed
by the module.
The number of frames of valid frame length that
have been transmitted from the Fast Ethernet
ports.
The total number of unicast packets that the
management LEC has received (In) and transmitted
(Out) for a single ATM switch on the network.
The number of frames that the management LEC
has discarded because it did not recognize the
protocol.
Virtual Circuit Identifier. A unique numerical tag as
defined by a 16 bit field in the ATM cell header that
identifies a virtual circuit.
Virtual Path Identifier. An 8 bit field in the ATM cell
header which indicates the virtual path over which
the cell should be routed.
Counter Fields
64