Avaya M770 User Manual page 70

Field
LECS Discovery
Length
LES Activity Status
LES Address
LES ATM Address
LES ELAN Name
LES ELAN Type
LES Name
LES Registration Type
LES Required State
Line Status
Avaya M770 M770 ATM Manager User Guide
Description
Indicates the method used by the management LEC
to establish a direct configuration VCC to the LECS.
The length of the ATM address, expressed as a
number of bits. The maximum length is 152 bits, as
ATM routing is done for only 19 byte addresses.
The activity status of the LES. Possible statuses are:
• active - The LES has resilient or distributed
capability and is active.
• standby - The LES has resilient capability
and is on standby.
The ATM address of the LES.
The ATM address of the LES that the management
LEC has joined.
The name of the ELAN.
The type of ELAN. Possible types are:
• Ethernet
• Token Ring
The name of the LES. This must correspond to an
ELAN with the same name.
The LES registration mode to be supported by the
LECS. Possible modes are:
• Prop LANE autosense - The LECS will
adopt the proprietary registration version
from the first registering LES.
• Prop LANE resilient - The LECS will only
allow a LES using the proprietary registration
method which supports resilient LESs.
• Prop LANE distributed - The LECS will
only allow a LES using the proprietary
registration method which supports
distributed LESs.
The required state of the LES. Possible states are:
• up
• down
Indicates the line status of an interface, including
loopback and failure state information. Line status
can represent multiple failures.
Configuration Fields
70