Avaya M770 User Manual page 82

Appendix C
Invalid ATM Address
Invalid Destination
Invalid Parameters
Invalid Requester-ID
LE-ARP requests
LE-ARP responses
LE_Configure error
LEC not recognized
Malformed Requests
Module
Multicast Packets
Rx Errors
Short Events
63
The number of CONFIGURE requests rejected due
to the "invalid ATM address" error.
The number of CONFIGURE requests rejected due
to the "invalid destination" error.
The number of CONFIGURE requests rejected due
to the "invalid request parameter" error.
The number of CONFIGURE requests rejected due
to the "invalid requester ID" error.
The number of responses to LAN Emulation
Address Resolution Protocol (LE_ARP) requests
that the LES has forwarded to this management
LEC (In), because the LES did not know the ATM
address. If the management LEC owns the address,
it will respond directly to the LEC that sent the
request.
The number of LE_ARP requests that the
management LEC has sent to the LES (Out),
because it needs an ATM address. If the LES knows
the ATM address, it sends it to the management
LEC. If it does not know the ATM address, the LES
forwards the address request to any proxy LECs
that are registered with it, so that they can respond
directly if they own the address.
The number of responses to LAN Emulation
Address Resolution Protocol (LE_ARP) requests
that the management LEC has received (In) and
the number of LE_ARP requests that it has
responded to (Out).
The number of CONFIGURE requests rejected due
to the "LE_Configure" error.
The number of CONFIGURE requests rejected due
to the "LEC not recognized" error.
The number of malformed CONFIGURE requests
dropped by the LECS.
The slot number of the Avaya M400 module
selected.
Total number of good packets received that were
directed to a multicast address. Note that this
number does not include packets directed to the
broadcast address.
Total number of error frames received on the port.
Total number of events on the port whose activity
duration is less than the allowed value
Avaya M770 M770 ATM Manager User Guide