Avaya M770 User Manual page 76

Field
Registration Mode
Remote at Address
Remote at Resilient LECS
Remote at WKA
Remote Node Id
Remote Port Number
Required State
Root Virtual Port - SVC
VCI range
rt-VBR Admin Weight
Rx Cell discards
Avaya M770 M770 ATM Manager User Guide
Description
The type of LES declared to the LECS during
registration. Possible modes are:
• manual -The LECS does not support the
proprietary automatic LES address
determination method'.
• None - The LES is not registered with the
LECS.
• Prop LANE resilient - The LES will register
with the LECS using the proprietary
'automatic LES address determination
method', and it will act as a resilient LES.
• Prop LANE distributed - The LES will
register with the LECS using the proprietary
'automatic LES address determination
method', and it will act as a distributed LES.
Note: If the LES mode is set to 'manual', and the
LES is moved, you will need to reconfigure the
LECS manually, so that it will find the LES.
This module will advertise via ILMI the 20 byte
LECS address specified here that is located on a
remote module.
This module will advertise via ILMI the resilient
elected LECS address that is located on a remote
module.
This module will advertise via ILMI the LECS
address at the WKA which is located on a remote
module.
Node ID of the peer node.
Port number of the peer node.
The required state of the LES. Possible states are:
• up
• down
VCI values allowed for use on this Root Virtual
Port.
The administrative weight given to the rt-VBR
(realtime-Variable Bit Rate) class of service, when
determining the cost of a link.
Number of cell discards on hardware elements of
the module since the last reset.
Configuration Fields
76