Avaya M770 User Manual page 65

Appendix B
Field
Cable Length
Call Use
Cell Mapping
Configuration Symbol
Configured ATM prefix
Configured ELAN Name
Configured ILMI Status
Configured Node Id
Configured Node Level
Configured Node Peer
Group Id
65
Description
The BNC coaxial cable length. The possible values
are:
• 0 - 255 feet. This is the default length.
• 225 - 450 feet.
The type of VC (Virtual Channel):
• PVC - Permanent VC
• SVC - Switched VC
The mapping mode used for transmitting ATM cells
over a DS3 port. The possible values are:
• ADM - ATM Direct Mapping. This is the
default setting.
• PLCP - Physical Layer Convergence Protocol.
The version of the module. The version is updated
whenever there is a functional modification to the
module.
For Agent Configuration: The version of the
hardware and firmware of the agent.
The configured ATM address prefix of the Avaya
M770 ATM Device. When the switch is reset, this
becomes the Current ATM Address.
The name of the ELAN that the management LEC
expects to join when it next leaves and re-enters
the network. This information is sent to the LECS,
which uses it to determine the ELAN that the
management LEC should join. If you do not specify
an ELAN name, the management LEC will join the
default ELAN of the type that you specify.
The configured state of the ILMI protocol stack.
The identifier of the node within the PNNI domain.
Ensure that the Node ID is unique within the
domain.
The PNNI hierarchy level in which the node
resides.
The Peer Group ID in which the node resides.
Avaya M770 M770 ATM Manager User Guide