Acon On Call ExtraMobile User Manual page 41

Display
Temperature has exceeded
the operating temperature of
the system
Temperature is below the
operating temperature of the
system
Battery is low but has enough
power to run 20 more tests.
Battery is discharged and the
meter does not allow for more
tests until replacement with a
new battery.
Meter electronics failure.
Improper type of test strip
used.
Test strip damaged or
calibration error.
Communications failure.
Causes
Move to a cooler environment and repeat
the test.
Move to a warmer environment and repeat
the test.
Test results will still be accurate, but
replace the battery as soon as possible.
Replace the battery and repeat the test.
If the problem persists, please contact
your local distributor.
Please make sure you use the On Call
Extra test strip with the On Call
Mobile Blood Glucose Meter.
If the problem persists, please contact
your local distributor.
Please test again using a new strip.
If the problem persists, please contact
your local distributor.
There is an error in transferring data to the
device. Check your device.
Make sure that Bluetooth
is carried out within 10 meters, and there
is no interference from metal shields and
other Bluetooth
36
Solution
®
®
communication
® devices.
®
Extra