Clearing The Memory - Acon On Call ExtraMobile User Manual

Note: Only test results that have been marked as "before meal" or "after meal"
are included in pre-meal and post-meal averages. All blood glucose results are
included in the general 7, 14, 30, 60 and 90-day averages.
6. If there are fewer than 7, 14, 30, 60 and 90 days in memory, all the readings
without the pound (#) sign currently stored in memory will be averaged instead.
If you are using the meter for the very first time, no value will appear on the
display. This means that no records have been stored in memory. If you have
not marked any results as "before meal" or "after meal", no value will appear on
the display for the pre-meal or post-meal averages. This means that no records
have been stored as "before meal" or "after meal" in memory.
7. Press the OK button to turn off the display.
Note: Results from quality control tests will not be included in the averages.
When viewing results in memory, these values are marked with a pound sign (#)
to show that they will not be included in the 7, 14, 30, 60 and 90-day averages.

Clearing the Memory

Take extreme caution when clearing the memory as this is not a reversible operation.
To clear the memory:
1. With the meter off, press and hold the ▲ button for two seconds. This will turn
on the meter and enter the delete mode.
2. To clear the memory, press and hold both the ▲ and ▼ buttons for two seconds.
3. The display will show "MEM" and "- - -". The meter will clear its memory and
turn itself off after a moment.
4. If you entered the delete mode but want to exit without deleting the recorded
data, press the OK button. This will turn the meter off without deleting any data.
OR
28