Acon On Call ExtraMobile User Manual page 17

5. Time: The hour will appear at the top of the display. Press the ▲ or ▼ button
to change to the correct hour. Press the OK button to save your choice and set
the minutes. Press the ▲ or ▼ button to change to the correct minute. Press
the OK button to save your choice. You can then start to set the meal marker
feature.
6. Meal Marker: The meter comes with the meal marker feature disabled. The
meter allows the user to enable or disable this option. The words "On" or "Off"
will be displayed on the large center segments of the display. The before meal
symbol together with the after meal symbol will be displayed as shown below.
Press the ▲ or ▼ button to switch between turning the meal marker "On" and
"Off". Press the OK button to confirm your selection.
7. Audio Feature: The meter comes with the meter audio feature enabled. There
will be a short beep when it is turned on, after sample detection and when the
result is ready. The meter will sound three short beeps to sound a warning when
an error has occurred. Please check the error number on the display to confirm
what kind of error has occurred.
Press the ▲ or ▼ button to turn the meter beep "On" or "Off". Press the OK
button to confirm your selection.
8. Test Reminder: Test reminders are a useful way to remind you when to test.
You can set 1 to 5 reminders per day. Your meter is preset with the test reminder
disabled. You must turn it on to use this feature.
Hour
OR
Minute
OR
OR
OR
12
Hour
Minute