Meter Setup Before Testing - Acon On Call ExtraMobile User Manual

Before using your meter for the first time, you will need to adjust the settings that
are listed in detail below.
1. Meter Setup Mode: Press the OK button for 2 seconds to enter the meter setup
mode. The meter will automatically enter the setup mode when turned on for
the first time or every battery change.
2. Clock: Set the clock to 12 or 24 hour mode. Press the ▲ or ▼ button to switch
between the two settings. Then press the OK button to save your choice. Now
you can start to set the Date Format.
Note: The clock needs to be reset after replacing the battery.
3. Date Format: m-d or d-m will appear at the top of the display to indicate either
a month-day-year format or a day-month-year format. Press the ▲ or ▼ button
to switch between the two settings. Then press the OK button to save your choice.
4. Date: The year will appear at the top of the display. Press the ▲ or ▼ button to
increase or decrease the year. Once you have selected the correct year, press
the OK button to save your choice. Then you can start to set the month. Press
the ▲ or ▼ button to increase or decrease the month. Then press the OK button
to save your choice. You can now select the day. Press the ▲ or ▼ button to
increase or decrease the date. Then press the OK button to save your choice.
Then you can start to set the time.
m-d:
d-m:

Meter Setup Before Testing

Year Month
Year
OR
OR
Month
11
Day
Day