Chapter 6: KVM Extension
26
9. Use a Cat5e/6 cables up to 330 feet (100 meters) long to connect the
transmitter and receiver. Plug either end of the cable into the RJ-45 LINK
ports.
Secondary Monitor Connection
1. Use a DVI cable to connect the DVI port (Monitor B) of the MCD-DUAL and
DVI-IN port of the second C5R-DVI-HD-TX.
2. Plug the secondary DVI monitor (for local console) into the DVI-OUT port of
the second C5R-DVI-HD-TX.
3. Connect the secondary DVI monitor (for remote console) to the DVI-OUT
port of the second C5R-DVI-HD- RX.