LEGRAND Raritan MasterConsole MCD-104-DUAL User Manual page 9

1
Power Socket
2
Power Switch
3
USB Port (keyboard)
4
USB Port (mouse)
5
Audio Output Port
2 x DVI-I Connector
6
(Monitor A/ Monitor B)
7
Firmware Upgrade Connector
8
Reboot Button
9
Channel Ports
10
Chassis Ground
 Connect the power cord.
 Toggle the power on or off.
 Connect a USB keyboard.
 Connect a USB mouse.
 Connect audio input devices, such as speakers or
headphone.
 Connect monitors. OSD will show on Monitor A only.
(If your monitor does not have a DVI connector, an
appropriate video converter or adapter is required.)
 Connect a computer for upgrading the MCD-DUAL's
firmware.
 Reboot this KVM switch.
 Connect to computers, each channel with 2x RJ45 ports.
 An easy-to-connect chassis ground to prevent any
electrical shock.
Chapter 1: Introduction
5