Initial Startup Of The Arisense System - A.R.I. D-040 L ARISENSE Installation Operation & Maintenance

12 IOM D-040 L ARISENSE

4. INITIAL STARTUP OF THE ARISENSE SYSTEM

Once the air valve is physically installed and the Arisense system is initialized, it should be connected to the
communication network. This process is done via a special Smartphone Applications named Arisense.
Very Important: A.R.I.: provides two deferent methods of communication with the Air Valve; one uses a Bluetooth
communication (BT) and the other uses RF communication utilized by a Technician Unit (RT) supplied by A.R.I.
Each one of these methods uses a different Smartphone application.
For the BT application please refer to Chapter 4.1 and for the RT application please refer to Chapter 4.2 of this
document.
4.1 The Bluetooth (BT) application:

Download and install the BT Arisense application by scanning this QR code
with your Smartphone:

Download the Application file, install it on your Smartphone and make sure
that the application has all the required permissions.

Make sure that the Bluetooth communication of your Smartphone is switched
on.

Launch the app on your mobile device by clicking the ARISENSE icon
(applicable for software version 1.0.0.15).
1. Connecting the Arisense Application to the Air Valve:

The Welcome screen appears
General Note: At any stage of the application operation you can return to the main screen by clicking on the
ARISENSE icon at the top of the screen.
Picture 1 - ARISENSE icon
Picture 2 – Welcome screen