Automation Direct ProSense DPM1-P Series User Manual page 17

ENTER
validates data and parameters.
SHIFT: Selects mode or shifts blinking digit in
configuration.
UP: Increases value of blinking digit in configuration
mode.
(Bottom View)

Run Mode
>3s

Enter secret code to access this routine (default code is 0000).
If secret code is forgotten, proceed to load default configuration
to have access to lock-out configuration again.

Previous settings will be lost.

 


 
inP
 
Enters configuration and
:
Allows to change secret code
selecting 'YES'
Total lock-out of parameters

Menu partial lock-out.
0= unlocked
1= locked-out
DPM1-P User Manual, 1st Edition
User Manual - DPM1-P Series Panel Meters
 Mode menu lock-out
.. SETPOINT1 menu lock-out
.. SETPOINT1 value menu lock-out
..
SETPOINT2 menu lock-out
.. SETPOINT2 value menu lock-out
Serial output menu lock-out
.
Analog output menu lock-out.
(only appears if ANAP is installed. Only
.
in this case serial output menu does
not appear).

17