Rtsp Connection - D-Link DNR-4020-16P User Manual

Section 3 - Configuration
Use this page to configure your Real Time Streaming Protocol (RTSP) connection settings.
Designate the custom protocol to use (select 1-16 from the
Custom
drop-down menu).
Protocol
Specify a protocol name to use.
Protocol
Name
Select Main Stream or Sub Stream. If you select Sub Stream, the
Stream Type
options on the right will be enabled.
Select the protocol type to use for the stream. This is set to
Protocol Type
RTSP by default.
Select the RTSP port to use. This is set to 554 by default.
Port
Enter the absolute path for the RTSP connection to use.
Abs Path
D-Link DNR-4020-16P User Manual

RTSP Connection

89