D-Link DNR-4020-16P User Manual page 36

Section 3 - Configuration
Temperature Param.
Toggle this to enable temperature measurement.
Enable
Select the desired unit from Fahrenheit and Celsius.
Temperature
Unit
Select the unit to measure objects in the camera's display.
Length Units
Enter the cavity temperature of the camera.
Cavity Temp.
This refers to the difference between the measured temperature
Correction
of an object and the actual temperature. Enter a value manually.
Coefficient
Enter the height at which the camera is mounted.
Mount
Distance
Toggle this to overlay detected faces with a color corresponding to
Face Color
their measured temperature.
Toggle this to automatically compensate for the temperature of the
Environment
environment.
Adaptation
Toggle this to flag detected abnormal temperatures.
Abnormal
Temp. Display
Select the desired temperature area mode from the drop-down list.
Temperature
Area
Select the desired measurement mode from the drop-down list.
Temp.
Measure
Mode
Enter the normal temperature range. Values outside this range can be
Normal Temp.
set to trigger an alarm.
Range
D-Link DNR-4020-16P User Manual 31