Alarm Out - D-Link DNR-4020-16P User Manual

Section 3 - Configuration
On this page you can configure the NVR's interactions with external devices
connected to its Alarm Out interface.
Select the alarm out interface (either 1 or 2).
Port Number
Designate a name for the alarm out connection.
Port Name
Select either Close or Open.
Action After
Receiving
Trigger
Select the alarm out put mode (Switch Mode by default).
Alarm Output
Mode
Configure similar settings for devices connected to a camera's
Camera Alarm
alarm out interface.
Out
D-Link DNR-4020-16P User Manual

Alarm Out

119