D-Link DNR-4020-16P User Manual page 86

Section 2 - Installation
1. Using a web browser, navigate to dlink.com/support/ and select your
region.
2. On the next screen, enter the model number of your NVR in the search
bar and click Search. Click the picture of your NVR. On the product page,
click the Download button next to Setup Wizard.
3. Once the executable file has finished downloading, click it and follow the
instructions to install the Setup Wizard.
4. Open the Setup Wizard. It will display the MAC address and IP address
of your NVR. If you have a DHCP server on your network, this will be a
dynamic IP address. If your network does not use a DHCP server, the NVR's
default static IP 192.168.0.20 will be displayed. Select your NVR, then click
the Link button to continue.
5. Log into the web user interface using the same username and password
used to access the HDMI / VGA interface. If this is your first time using the
device, you will be prompted to create a username and password. Click
Save.
6. To view the NVR display and configure the NVR, on the main screen of the
Setup Wizard, click the Search button, then select your NVR and click the
Link button to open the Web UI.
Alternatively, open a web browser and type the NVR's IP address into the
URL bar and press Enter.
Or enter http://DNR-4020-16P-xxxx.local. in the address bar of your web
browser (xxxx is the last four alphanumeric characters of the MAC ID on the
device label).
D-Link DNR-4020-16P User Manual 81