Section 3 - Configuration
On this page you can enable or disable an alarm to trigger when an unusual event
occurs, such as a hard drive failure or loss of connectivity.
Enable or disable an abnormal alarm.
Enable
Abnormal
Alarm
From left to right: trigger an alarm when the NVR fails to detect
Alarm Type
a hard drive, when it detects an IP conflict, or when it loses its
network connection.
Select the event(s) the alarm should trigger from the following
Event Actions
list:
•
Email: Send an email notification
•
Buzzer: Trigger a buzzer sound
•
Popup Message: Display a notification in a popup window
Trigger a notification on the Alarm Out interface(s).
Enable Alarm
Out
D-Link DNR-4020-16P User Manual
Abnormal Alarm
118