Table of Contents
Advertisement
Mounting the RX
Use sticky back Velcro to mount the RX
as shown. Mount Remote Receivers in
various positions following the
recommendations for your particular R/C
system and range check accordingly.
You can install the Receivers ON/OFF
switch in the provided mount and install it in
a location like the one shown here.
Mounting the Gyro
Use the space left of the Receiver to mount
the Gyro of your choice. Use the 2-sided
adhesive tape provided by the Gyro
manufacture to adhere the gyro in place.
Follow the manufacture guidelines to
connect to the receiver.
BVM ® 2018
eBandit Evo
Assembly & Operation Manual
9
02/27/2018
Advertisement
Table of Contents
Need help?
Do you have a question about the Go Fly eBandit Evo and is the answer not in the manual?
Questions and answers