Chapter 3 The Web Interface; Accessing The Gv-Web Report Lite - GeoVision GV-3D People Counter V2 User Manual

The Web Interface
3

Chapter 3 The Web Interface

After installing the GV-3D People Counter V2 on the network, you can access GV-Web Report
Lite to look up counting data. The GV-Web Report Lite is a Web server built in the GV-3D
People Counter V2. By default, when the GV-3D People Counter V2 is installed to a LAN
with the DHCP server, the GV-3D People Counter V2 uses a dynamic IP address assigned
by the server. If installed in a LAN without the DHCP server, the default IP address
192.168.0.10 will be applied.

3.1 Accessing the GV-Web Report Lite

System Requirements
To access GV-3D People Counter V2 through Web browser, ensure your PC is in good
network connection, and use the following web browser:
Microsoft Internet Explorer 10 or above

Logging In
1. In your Web browser, type the IP address or the domain name of the GV-3D People
Counter V2 in the Location / Address field.
Figure 3-1
2. Select a different Language if needed.
3. Type the ID and password. The default ID and password are admin.
4. Type the characters shown in the image and click Login.
9