Running The Demo; Using The Gui - Xilinx Spartan 6 FPGA Quick Start Manual

Motor control development kit

Hide thumbs Also See for Spartan 6 FPGA:

Table of Contents

Qdesys Sensorless Field Oriented Control Quick Start Guide

Running the Demo

The Qdesys Motor Control Manager Application (mc_manager) provides an extensive graphical user

interface for controling and monitoring the system. This is an extensive suite of applications that allow the

expert user to monitor every aspect of the control loop and finely tune the peformance for their particular

motors and system parameters. In addition, there high level controls that allow for quick demonstrations

without expert knowledge of motor control or this application. The following steps will introduce you to

some of the basic functionality.

1. From the Windows Start menu choose Start  All Programs  Qdesys  mc_manager 

mc_manager

2. When the mc_manager GUI opens, click RUN to initialize the Ethernet connection. Verify

that the link connection status illuminates green in the window. Note that it may turn orange for

several seconds while negotiating the link. You should get this on the GUI after the connection is

complete:

Table of Contents