TimerControl
This section describes TimerControl category for the BU1203M series.
This camera series is able to generate Timer0Active signal, derived from exposure start, by register setting.
This signal can be used as strobe control signal.
TRIG_IN
Trigger
(Frame Start Trigger)
Exposure
(First line)
EXPOSURE ACTIVE
TIMER0 ACTIVE
TimerTriggerSource = Line0Active
TimerTriggerSource = FrameTrigger
TimerTriggerSource = ExposureStart
● Registers
Register
Visibility
TimerSelector
Expert
TimerDuration
Expert
TimerDelay
Expert
TimerTriggerSource
Expert
Copyright © 2015 - 2019 Toshiba Teli Corporation, All rights reserved.
(Line0)
Access
R
Returns the selected timer name.
R/W
Sets the width of Timer0Active signal.
R/W
Sets the delay of Timer0Active signal.
R/W
Selects the source of Timer0Active pulse to start.
TriggerDelay
Delay
Duration
Timer0Active
Description
54 / 74
※ ActiveLow
D4245116F
http://www.toshiba-teli.co.jp/en/