Digitaliocontrol - Toshiba teli BU Series Instruction Manual

DigitalIOControl

This section describes DigitalIOControl category for the BU1203M series.
This camera series provides GPIO output selected by the register setting. And the polarity of the signal is
able to switch by the register setting. The following chart shows the specifications of the selectable signals.
EXT_TRIG
Exposure
CMOS Transfer
VD
USB Streaming
Timer0Active
ExposureActive
FrameActive
FrameTransfer
Active
FrameTrigger
Wait
● Registers
Register Visibility
LineSelector Beginner
LineSource Beginner
LineMode Beginner
LineInverter Beginner
LineStatus Beginner
UserOutputValue Beginner
Copyright © 2015 - 2019 Toshiba Teli Corporation, All rights reserved.
Line 1
Line 2
Line 3
Line N
Delay Duration
Selectable signals
Access
R/W Selects the Line of I/O connector.
R/W Selects the source of the output signal.
R Returns the direction of each Line signal.
R/W Selects the polarity of each Line signal.
R Returns the status of each Line signal.
R/W Sets the user output value.
49 / 74
Exposure
CMOS Transfer
ActiveLow
Random Trigger Shutter Mode (Global Reset)
Description
http://www.toshiba-teli.co.jp/en/
D4245116F