Table of Contents
Advertisement
15 Technical data
15.1 Technical data, Hägglunds CB
For complete technical data see
Hanging load falls down!
Danger to life, risk of injury or damage to equipment, in hanging load applications!
▶
Charge pressure at motors connection must be according to recommended
pressure under all conditions, see data sheet
charge pressure.
▶
Changes to the factory settings must only be made by Bosch Rexroth specialist
personnel.
15.1.1 Hydraulic fluids
The hydraulic CB motor is primarily designed for operation with hydraulic fluids
according to ISO 11158 HM.
Before the start of project planning, see Data sheet
quick reference
for detailed information on hydraulic fluids and specific additional
demands.
Filtration of the hydraulic fluid
A contamination level of at most 18/16/13 according to ISO 4406 is required.
The less contamined the fluid, the longer the service life of the hydraulic motor.
Details regarding the selection of hydraulic fluid
The hydraulic fluid should be selected such that the operating viscosity in the
temperature range, as measured in the motor housing, is within optimum operation
range according to chapter Hydraulic fluids in data sheet
RE 15302-WA/05.2019, Hägglunds CB, Installation and maintenance manual , Bosch Rexroth Mellansel AB
RE
15302.
DANGER
RE 15302
RE 15414 Hydraulic fluid
RE
Technical data
67/68
, chapter Recommended
15302.
Hide quick links:
Advertisement
Table of Contents
