Bosch Hagglunds CB Installation And Maintenance Manual page 38

38/68 Installation
Bosch Rexroth Mellansel AB, Installation and maintenance manual , Hägglunds CB, RE 15302-WA/05.2019
DD00100402
Fig. 33: Mounting of shrink disc to adapter shaft or coupling motor
Clamping rings
Seal
Washer
Coupling ring
Hollow shaft
Fig. 34: Shrink disk
*) The conical surface between the coupling ring and the clamping rings as well as the
screws shall be coated with Molykote G-Rapid plus paste, (see Fig. 34). This is done
from the factory at delivery.
When a motor has been in for overhaul or service and shall be reassembled it may
be necessary to relubricate those surfaces with Molykote G-Rapid plus paste again
but only on the specified surfaces.
Cleaned surface - no lubrication
DD00100620
DD00058194
*) Dashed line =
Lubricated
surface
Centre of shaft