Personal Protective Equipment (Ppe) - Bosch Hagglunds CB Installation And Maintenance Manual

Radial piston hydraulic motor
Table of Contents

Advertisement

10/68
Safety instructions
Bosch Rexroth Mellansel AB, Installation and maintenance manual , Hägglunds CB, RE 15302-WA/05.2019
Escaping oil mist!
Risk of explosion, fire, health hazard, environmental pollution!
Depressurize the machine/system and repair the leak.
Keep open flames and ignition sources away from the Hägglunds motors.
If Hägglunds motors are to be situated in the vicinity of ignition sources or
powerful thermal radiators, a shield must be erected to ensure that any escaped
hydraulic fluid can not ignite, and to protect hose lines from premature aging.
High noise development in operation!
Danger of hearing damage and hearing loss!
The noise emission of Hägglunds motors depends on speed, operating pressure and
installation conditions.
Always wear hearing protection when in the vicinity of the operating Hägglunds
motor.
Hot surfaces on the Hägglunds motor!
Risk of burns!
Allow the Hägglunds motors to cool down sufficiently before touching it.
Wear heat-resistant protective clothing, e.g. gloves.
Improper routing of cables and lines!
Tripping hazard and damage to equipment!
Lay cables and lines so that they can not be damaged and nobody can trip over
them.
Contact with hydraulic fluid!
Hazard to health/health impairment e.g. eye injuries, skin damage, toxication during
inhalation!
Avoid contact with hydraulic fluids.
When working with hydraulic fluids, strictly observe the safety instructions
provided by the lubricant manufacturer.
Use your personal protective equipment (e.g. safety glasses, safety gloves,
suitable working clothes, safety shoes).
If hydraulic fluid inadvertently comes into contact with your eyes or bloodstream
or is swallowed, consult a doctor immediately.
Escaping hydraulic fluid due to machine/system leakage!
Risk of burns and risk of injury due to escaping oil jet!
Depressurize and de-energiize the machine/system and repair the leak.
Never attempt to block or seal the leak or oil jet with a cloth.

2.7 Personal Protective Equipment (PPE)

PPE is the responsibility of the user of the Hägglunds motors. Observe the safety
regulations and provisions of your country. All components of the PPE must be
intact.
WARNING
CAUTION

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents