Symbols - Bosch Hagglunds CB Installation And Maintenance Manual

6/68 This documentation
Bosch Rexroth Mellansel AB, Installation and maintenance manual , Hägglunds CB, RE 15302-WA/05.2019
Safety instructions are formatted as follows:
Type of risk
Consequences of non-observance
▶ Safety precautions
▶ <List>
• Warning sign:
• Signal word:
• Type of risk!:
• Consequences:
• Precaution:
Table 2: Risk categories to ANZI Z535.6-2006
Warning signs, signal word
DANGER
WARNING
CAUTION
NOTICE
1.3.2

Symbols

The symbols below indicate instructions which are not safety-relevant but help to
make the documentation easier to understand.
Table 3: Key to symbols
Symbol Meaning
You will be unable to use or operate the product optimally unless this
information is observed.
▶
Individual self-contained action (alternatives)
•
1.
Numbered operating instruction:
The numbers indicate the actions follow one another in sequence
2.
3.
Center of gravity
Markings on packaging to indicate where the center of gravitiy are.
SIGNAL WORD
Draws your attention to the hazard
Indicates the degree of hazard
Specifies the type and source of the hazard
Describes the consequences of non-compliance
Specifies how the hazard can be prevented
Meaning
Indicates a dangerous situation which will result in death or
serious physical injury unless averted.
Indicates a dangerous situation which could result in death
or serious physical injury unless averted.
Indicates a dangerous situation which could result in minor
to moderate physical injury unless it is averted.
Material damage: the product or its environment could be
damaged.