3. Click "Browse..."to select the XPOSE
software install location and click"Install"
5. Click "Finish" and complete the installation,
as shown in the figure above
Registration:
1. Double click this icon
interface as follow
Click Register and fill in the blank with first name,
last name, email, company and country and then
click Register Now.
IC2
,and enter the log on
User Manual
4. During installation, it will pop up the
window of Install Shield Wizard for Virtual
Com port,click"Next"
6. Click "Finish"and is ready to run the XPOSE
software
2. Click Activate and scan the QR code
an email from RGBlink Registrations will be sent
to the Register email address.
14